Name: Sharkoon RGB Wave kućište, midi, bez napajanja, ATX
Brand: Sharkoon
Availability: InStock

Sharkoon RGB WAVE Midi Tower ATX kućište bez napajanja, prozirna bočna stranica, prednji/stražnji RGB ventilatori 4×120mm, crno; Brand: SHARKOON; Model: ; PartNo: 4044951037544; 63073 - For Gamers and Surfers: The air- permeable front panel of the RGB Wave has a strikingly effective 3D wave pattern, behind which the three RGB fans radiate in all their colors. Together with the 120 mm fan installed at the rear panel, everything will stay nice and cool in this midi- ATX case. The RGB...

68,50 €

516,11 kn

Stavi u listu želja

U trgovinu

Sharkoon RGB WAVE Midi Tower ATX kućište bez napajanja, prozirna bočna stranica, prednji/stražnji RGB ventilatori 4×120mm, crno

- For Gamers and Surfers: The air-permeable front panel of the RGB Wave has a strikingly effective 3D wave pattern, behind which the three RGB fans radiate in all their colors. Together with the 120 mm fan installed at the rear panel, everything will stay nice and cool in this midi-ATX case. The RGB Wave also has an I/O panel with two USB 3.0 ports and one USB Type-C 3.2 Gen 2 port, and, in addition, the case comes with a side panel made of tempered glass. Make Waves - The front panel of the RGB Wave offers an especially eye-catching look. Strips made of synthetic material traverse across the front panel and provide the case with a unique 3D wave design. This is brought to the fore by the illumination of the three 120 mm RGB fans that are pre-installed directly behind. The finishing touch is given by the carbon-fiber textured frame that surrounds the wave design. Fast Connection for Data Surfers - In addition to two USB 3.0 ports, the I/O panel of the RGB Wave also has a Type-C port with the USB 3.2 Gen 2 specification. Swift data transfer is possible at any time thanks to the accessible location near the front of the case. Always Cool Inside - In the RGB Wave, everything is already there to make a cooling ventilation possible. In addition to a front panel that allows air to easily flow into the case, four 120 mm RGB fans are already pre-installed for immediate cooling: Three in the front and one in the back of the case. To enhance the airflow even further, the top of the case provides an optional location for two additional fans with a diameter of either 120 mm or 140 mm. If required, a 120 mm fan can also be installed on the top of the power supply tunnel. The built-in dust filters can be easily removed and freed of collected dust so that everything inside stays nice and clean. Made for Presenting - In addition to its chic front panel, the RGB Wave is also an elegant showcase thanks to the tempered glass side panel. The installed hardware components come into their own and can be optimally presented. In order to make the neat and tidy impression possible, the cables can be routed out of sight using the case’s cable pass-throughs. Spacious, Despite the Compact Size - With its slim dimensions, the RGB Wave cuts a fine figure and can be easily integrated into any setup. At the same time, there is also space for larger pieces of hardware in the compact midi-ATX case: Graphics cards can be up to 33.5 cm long, CPU coolers up to 15.7 cm high and power supply units up to 17.5 cm long. If value is put on having a lot of data storage, then up to five SSDs can be installed inside the case. In addition, two 3.5" HDDs can be accommodated in the HDD/SSD cage if no SSDs are installed in this. Specifications General - Form Factor: ATX - Expansion Slots: 7 - Interior Painting: Yes - Tool-free Devices Installation: Yes - Cable Management System: Yes - Side Panel: Tempered Glass Weight & Dimensions - Weight: 5.4 kg - Dimensions (L x W x H): 40.3 x 20.0 x 45.6 cm RGB Compatibility - Type: Addressable - Ports: 4 - Manual Control: 14 Modes - Mainboard Compatibility: MSI Mystic Light Sync, ASUS Aura Sync, Gigabyte RGB Fusion Ready, ASRock Polychrome Sync - RGB pinout: 5V-D-coded-G Max. Drive Bays - 3.5": 2 - 2.5": 5 I/O - Type-C (USB 3.2 Gen 2): 1 - USB 3.0 (Top): 2 - Audio (Top): Yes Fan Configuration - Front Panel: 3x 120 mm Addressable RGB LED Fan (Pre-Installed) - Rear Panel: 1x 120 mm Addressable RGB LED Fan (Pre-Installed) - Top Panel: 2x 120 mm Fan or 2x 140 mm Fan (Optional) Compatibility - Mainboard: Mini-ITX, Micro-ATX, ATX - Max. Length Graphics Cards: 31.0 / 33.5 cm* - Max. Height CPU Cooler: 15.7 cm - Max. Length PSU: 17.5 cm - Optional Accessories SHARK Blades RGB Package Contents - RGB Wave - Accessory Set - Manual - Note: Without front fan

69,30 €

522,14 kn

Stavi u listu želja

U trgovinu

Sharkoon RGB WAVE Midi Tower ATX kućište bez napajanja prozirna bočna stranica, prednji/stražnji RGB ventilatori 4×120mm crno

- For Gamers and Surfers: The air-permeable front panel of the RGB Wave has a strikingly effective 3D wave pattern, behind which the three RGB fans radiate in all their colors. Together with the 120 mm fan installed at the rear panel, everything will

70,77 €

533,22 kn

Stavi u listu želja

U trgovinu

Sharkoon RGB WAVE Midi Tower ATX kućište bez napajanja, prozirna bočna stranica, prednji/stražnji RGB ventilatori 4×120m 4044951037544

- For Gamers and Surfers: The air-permeable front panel of the RGB Wave has a strikingly effective 3D wave pattern, behind which the three RGB fans radiate in all their colors. Together with the 120 mm fan installed at the rear panel, everything will stay nice and cool in this midi-ATX case. The RGB Wave also has an I/O panel with two USB 3.0 ports and one USB Type-C 3.2 Gen 2 port, and, in addition, the case comes with a side panel made of tempered glass. Make Waves - The front panel of the RGB Wave offers an especially eye-catching look. Strips made of synthetic material traverse across the front panel and provide the case with a unique 3D wave design. This is brought to the fore by the illumination of the three 120 mm RGB fans that are pre-installed directly behind. The finishing touch is given by the carbon-fiber textured frame that surrounds the wave design. Fast Connection for Data Surfers - In addition to two USB 3.0 ports, the I/O panel of the RGB Wave also has a Type-C port with the USB 3.2 Gen 2 specification. Swift data transfer is possible at any time thanks to the accessible location near the front of the case. Always Cool Inside - In the RGB Wave, everything is already there to make a cooling ventilation possible. In addition to a front panel that allows air to easily flow into the case, four 120 mm RGB fans are already pre-installed for immediate cooling: Three in the front and one in the back of the case. To enhance the airflow even further, the top of the case provides an optional location for two additional fans with a diameter of either 120 mm or 140 mm. If required, a 120 mm fan can also be installed on the top of the power supply tunnel. The built-in dust filters can be easily removed and freed of collected dust so that everything inside stays nice and clean. Made for Presenting - In addition to its chic front panel, the RGB Wave is also an elegant showcase thanks to the tempered glass side panel. The installed hardware components come into their own and can be optimally presented. In order to make the neat and tidy impression possible, the cables can be routed out of sight using the case’s cable pass-throughs. Spacious, Despite the Compact Size - With its slim dimensions, the RGB Wave cuts a fine figure and can be easily integrated into any setup. At the same time, there is also space for larger pieces of hardware in the compact midi-ATX case: Graphics cards can be up to 33.5 cm long, CPU coolers up to 15.7 cm high and power supply units up to 17.5 cm long. If value is put on having a lot of data storage, then up to five SSDs can be installed inside the case. In addition, two 3.5" HDDs can be accommodated in the HDD/SSD cage if no SSDs are installed in this. Specifications General - Form Factor: ATX - Expansion Slots: 7 - Interior Painting: Yes - Tool-free Devices Installation: Yes - Cable Management System: Yes - Side Panel: Tempered Glass Weight & Dimensions - Weight: 5.4 kg - Dimensions (L x W x H): 40.3 x 20.0 x 45.6 cm RGB Compatibility - Type: Addressable - Ports: 4 - Manual Control: 14 Modes - Mainboard Compatibility: MSI Mystic Light Sync, ASUS Aura Sync, Gigabyte RGB Fusion Ready, ASRock Polychrome Sync - RGB pinout: 5V-D-coded-G Max. Drive Bays - 3.5": 2 - 2.5": 5 I/O - Type-C (USB 3.2 Gen 2): 1 - USB 3.0 (Top): 2 - Audio (Top): Yes Fan Configuration - Front Panel: 3x 120 mm Addressable RGB LED Fan (Pre-Installed) - Rear Panel: 1x 120 mm Addressable RGB LED Fan (Pre-Installed) - Top Panel: 2x 120 mm Fan or 2x 140 mm Fan (Optional) Compatibility - Mainboard: Mini-ITX, Micro-ATX, ATX - Max. Length Graphics Cards: 31.0 / 33.5 cm* - Max. Height CPU Cooler: 15.7 cm - Max. Length PSU: 17.5 cm - Optional Accessories SHARK Blades RGB Package Contents - RGB Wave - Accessory Set - Manual - Note: Without front fan

72,25 €

544,37 kn

Stavi u listu želja

U trgovinu

63073 - Sharkoon RGB WAVE Midi Tower ATX kućište bez napajanja, prozirna bočna stranica, prednji/stražnji RGB ventilatori 4x120mm, crno - 63073 - - For Gamers and Surfers The air-permeable front panel of the RGB Wave has a strikingly effective 3D wave pattern, behind which the three RGB fans radiate in all their colors. Together with the 120 mm fan installed at the rear panel, everything will stay nice and cool in this midi-ATX case. The RGB Wave also has an I/O panel with two USB 3.0...

72,75 €

548,13 kn

Stavi u listu želja

U trgovinu

Sharkoon RGB WAVE Midi Tower ATX kućište bez napajanja, prozirna bočna stranica, prednji/stražnji RGB ventilatori 4×120mm, crno 63073 63073

- For Gamers and Surfers: The air-permeable front panel of the RGB Wave has a strikingly effective 3D wave pattern, behind which the three RGB fans radiate in all their colors. Together with the 120 mm fan installed at the rear panel, everything will stay nice and cool in this midi-ATX case. The RGB Wave also has an I/O panel with two USB 3.0 ports and one USB Type-C 3.2 Gen 2 port, and, in addition, the case comes with a side panel made of tempered glass. Make Waves - The front panel of the RGB Wave offers an especially eye-catching look. Strips made of synthetic material traverse across the front panel and provide the case with a unique 3D wave design. This is brought to the fore by the illumination of the three 120 mm RGB fans that are pre-installed directly behind. The finishing touch is given by the carbon-fiber textured frame that surrounds the wave design. Fast Connection for Data Surfers - In addition to two USB 3.0 ports, the I/O panel of the RGB Wave also has a Type-C port with the USB 3.2 Gen 2 specification. Swift data transfer is possible at any time thanks to the accessible location near the front of the case. Always Cool Inside - In the RGB Wave, everything is already there to make a cooling ventilation possible. In addition to a front panel that allows air to easily flow into the case, four 120 mm RGB fans are already pre-installed for immediate cooling: Three in the front and one in the back of the case. To enhance the airflow even further, the top of the case provides an optional location for two additional fans with a diameter of either 120 mm or 140 mm. If required, a 120 mm fan can also be installed on the top of the power supply tunnel. The built-in dust filters can be easily removed and freed of collected dust so that everything inside stays nice and clean. Made for Presenting - In addition to its chic front panel, the RGB Wave is also an elegant showcase thanks to the tempered glass side panel. The installed hardware components come into their own and can be optimally presented. In order to make the neat and tidy impression possible, the cables can be routed out of sight using the case’s cable pass-throughs. Spacious, Despite the Compact Size - With its slim dimensions, the RGB Wave cuts a fine figure and can be easily integrated into any setup. At the same time, there is also space for larger pieces of hardware in the compact midi-ATX case: Graphics cards can be up to 33.5 cm long, CPU coolers up to 15.7 cm high and power supply units up to 17.5 cm long. If value is put on having a lot of data storage, then up to five SSDs can be installed inside the case. In addition, two 3.5" HDDs can be accommodated in the HDD/SSD cage if no SSDs are installed in this. Specifications General - Form Factor: ATX - Expansion Slots: 7 - Interior Painting: Yes - Tool-free Devices Installation: Yes - Cable Management System: Yes - Side Panel: Tempered Glass Weight & Dimensions - Weight: 5.4 kg - Dimensions (L x W x H): 40.3 x 20.0 x 45.6 cm RGB Compatibility - Type: Addressable - Ports: 4 - Manual Control: 14 Modes - Mainboard Compatibility: MSI Mystic Light Sync, ASUS Aura Sync, Gigabyte RGB Fusion Ready, ASRock Polychrome Sync - RGB pinout: 5V-D-coded-G Max. Drive Bays - 3.5": 2 - 2.5": 5 I/O - Type-C (USB 3.2 Gen 2): 1 - USB 3.0 (Top): 2 - Audio (Top): Yes Fan Configuration - Front Panel: 3x 120 mm Addressable RGB LED Fan (Pre-Installed) - Rear Panel: 1x 120 mm Addressable RGB LED Fan (Pre-Installed) - Top Panel: 2x 120 mm Fan or 2x 140 mm Fan (Optional) Compatibility - Mainboard: Mini-ITX, Micro-ATX, ATX - Max. Length Graphics Cards: 31.0 / 33.5 cm* - Max. Height CPU Cooler: 15.7 cm - Max. Length PSU: 17.5 cm - Optional Accessories SHARK Blades RGB Package Contents - RGB Wave - Accessory Set - Manual - Note: Without front fan

77,40 €

583,17 kn

Stavi u listu želja

U trgovinu

Sharkoon Midi Tower RGB Vawe, Black

Specifications General - Form Factor: ATX - Expansion Slots: 7 - Interior Painting: Yes - Tool-free Devices Installation: Yes - Cable Management System: Yes - Side Panel: Tempered Glass Weight & Dimensions - Weight: 5.4 kg - Dimensions (L x W x H): 40.3 x 20.0 x 45.6 cm RGB Compatibility - Type: Addressable - Ports: 4 - Manual Control: 14 Modes - Mainboard Compatibility: MSI Mystic Light Sync, ASUS Aura Sync, Gigabyte RGB Fusion Ready, ASRock Polychrome Sync - RGB pinout: 5V-D-coded-G Max. Drive Bays - 3.5": 2 - 2.5": 5 I/O - Type-C (USB 3.2 Gen 2): 1 - USB 3.0 (Top): 2 - Audio (Top): ? Fan Configuration - Front Panel: 3x 120 mm Addressable RGB LED Fan (Pre-Installed) - Rear Panel: 1x 120 mm Addressable RGB LED Fan (Pre-Installed) - Top Panel: 2x 120 mm Fan or 2x 140 mm Fan (Optional) Compatibility - Mainboard: Mini-ITX, Micro-ATX, ATX - Max. Length Graphics Cards: 31.0 / 33.5 cm* - Max. Height CPU Cooler: 15.7 cm - Max. Length PSU: 17.5 cm - Optional Accessories SHARK Blades RGB