DJI DJI Focus Controller
Cijena
od
9,56 €
do
6.357,29 €
Stavi u listu želja
Postavi obavijest o cijeni
Povijest najniže cijene
Podijeli
Prijavi grešku
DJI Focus Spare Part 03 2.4G Antenna
DJI Focus Spare Part 03 2.4G Antenna Mounted at the top of the remote controller to transmit the wireless signal.9,56 €
72,03 kn
DJI Focus Spare Part 07 Marking Ring
DJI Focus Spare Part 07 Marking Ring Allows you to jot down reference values for different lenses. One of the three rings is mounted on the remote controller.10,62 €
80,02 kn
DJI Focus Spare Part 12 Neck Strap
DJI Focus Sare Part 12 Neck Strap Attaches to the remote controller for easy carrying around your neck or over your shoulder.37,16 €
279,98 kn
DJI Osmo Spare Part 66 DJI Focus PRO i RAW Adaptor Cable (2m) kabel
DJI Osmo Spare Part 66 DJI Focus PRO i RAW Adaptor Cable (2m) kabel Connect the communication ports on the Focus Remote Controller and the Osmo - X5 Adapter using the DJI Focus - Osmo Pro/RAW Adaptor Cable. Then, you can use the DJI Focus to control the aperture and focus of Zenmuse X5 series camera.43,67 €
329,03 kn
DJI Focus Spare Part 02 Remote Controller CAN Bus Cable
DJI Focus Spare Part 02 Remote Controller CAN Bus Cable ADVANCED, PRECISE FOLLOW FOCUS SYSTEM The DJI Focus uses DJI’s expertise in brushless motors for previously unheard of levels of precision and accuracy. The brushless motor puts just ±0.02° of accuracy in your hands so that turning the remote is just like turning the lens itself. It also features high torque and a fast reaction speed so you can keep your subject in focus no matter how it moves.47,78 €
360,00 kn
DJI Focus Spare Part 06 Data Cable (2M)
DJI Focus Spare Part 06 Data Cable (2M) Connects the remote controller with the motor. Used in cable mode for firmware updates.62,65 €
472,04 kn
DJI Focus Spare Part 24 Focus Motor Expansion Module 5.8G
DJI Focus Spare Part 24 Focus Motor Expansion Module 5.8G ZNAČAJKE: The DJI Focus Expansion Module is used to extend the communication distance of the DJI Focus when used with Lightbridge compatible devices. It is compatible with the Matrice 600 when used with the Ronin-MX or Zenmuse X5/X5R. The DJI Focus Expansion Module can also be used to wirelessly control the Inspire 1 Pro/RAW camera?s aperture, focus and zoom from 3.1 miles (5 km) away. When using the DJI Focus with the Matrice 600 and the Ronin-MX, the Ronin-MX can provide power and signal communication to DJI Focus motor through DJI Focus - Expansion Module Power and Data Cable, so you can adjust focus from a distance using the DJI Focus expansion module. SPECIFIKACIJE: Operating Frequency: 5.725-5.825 GHz Transmission Distance: 50 m (the distance between the Expansion Module and the Master Remote Controller of the Matrice 600 or Inspire 1 Pro/RAW, unobstructed, free of interference) Transmitter Power (EIRP): 13 dBm Operating Temperature Range: -4° to 131°F (-20° to 55 °C) Operating Voltage: 100 [email protected] V UKLJUČUJE: DJI - Focus Motor Expansion Module (5.8G)180,37 €
1.359,00 kn
DJI Focus Spare Part 27 DJI Remote Controller Focus Mount nosač za daljinski upravljač
DJI Focus Spare Part 27 DJI Remote Controller Focus Mount nosač za daljinski upravljač ZNAČAJKE: Designed for : DJI Ronin 3-Axis Camera Stabilization Gimbal221,51 €
1.668,97 kn
DJI RS 4
DJI RS 4 ZNAČAJKE: Lightweight Design with 6.6 lb Payload OLED Touchscreen with Auto Lock 2nd Gen Native Vertical Shooting Automated Axis Locks Joystick or Bluetooth Mode Switching Supports Wireless Image Transmitter Teflon-Coated Axes 12-Hour Operation Time Enhanced operation efficiency, native vertical shooting, and an expanded accessory ecosystem make the DJI RS 4 a powerful tool for the mirrorless camera shooter. The gimbal only weighs around 2.4 lb and sports a load capacity of 6.6 lb capable of supporting your compact camera build. Teflon-coated axes reduce friction for a smoother balancing and operating experience. Other intuitive features include a fine-tuning knob, auto-locking OLED screen, and RSA communication port for use with expanded accessories. Second-Generation Quick Release Plate Design With the familiar dual-layered quick release plates of its predecessor, the RS 4 makes mounting and balancing your camera a breeze. The horizontal plate is newly designed for faster transitions to native vertical shooting. A fine-tuning knob adjusts the tilt axis to move your camera forward or backward. The upper plate has added placement guides for secure camera mounting. Compatibility For a full list of compatible cameras, please see the most current compatibility information on the DJI website. Second-Generation Automated Axis Locks When the gimbal is powered off, you can press and hold the power button, and the three axes unlock while the gimbal expands automatically, allowing you to start working in just two seconds. Press the power button once, and the axes automatically lock and enter sleep mode, making a move or storage significantly more efficient. The second iteration of this design has created smaller gaps when locked to further reduce gimbal shake. RSA Communication Port The RSA communication port allows you to integrate Ronin series accessories into your gimbal configuration. Add Ronin-specific or third-party accessories with control capabilities to switch between different shooting configurations. The DJI RS SDK protocol will allow third-party manufacturers and other developers to create future customized functions for the RS 4. Wireless Shutter Control By implementing Dual-Mode Bluetooth, the RS 4 supports wireless shutter control, saving time and effort with every use. After the initial Bluetooth pairing, you can control video and photo shooting by simply pressing the record button on the stabilizer. Previously paired cameras can automatically reconnect after the first use, eliminating the need for a camera control cable. New DJI Focus Pro Motor Pair the RS 4 with the new Focus Pro Motor using the designated USB-C port. The motor features a 30% increased speed and allows you to focus your lens via dial and zoom via joystick. Integrated Controls By simply sliding the new gimbal mode switch, you can alternate between Pan follow, Pan and Tilt follow, and FPV modes. The FPV mode selection is also customizable to 3D Roll 360, Portrait, or Custom, allowing you to adjust your equipment and get started as fast as possible. Other intelligent features include motion-lapse, track, and panorama. The trigger button can be customized to FPV mode, which causes the three axes to follow the direction of the grip's movement when held down. Fourth-Gen RS Stabilization Algorithm Empowered by a next-generation stabilization algorithm, the RS 4 provided enhanced stability over the RS 3, effortlessly managing vertical shooting, fast-paced movements, and low-angle shots. Auto-Locking OLED Screen The RS 4 is equipped with a fixed OLED touchscreen with a new auto-lock feature. Once locked, the screen will display the current gimbal and joystick moves at a low brightness to prevent accidental switching and conserve battery. Integrated Monitoring and Control Remotely adjust camera exposure directly in the Ronin app, or control the gimbal with the virtual joystick to get an integrated monitoring and control experience. With the Ronin Image Transmitter, a smartphone can be used as a motion controller to remotely control the RS 4 gimbal for more flexible and dynamic camera movements. Enhanced Battery and Fast Charging The RS 4 battery grip features a cartridge design, making it easier to swap batteries and smaller for storage. It can even be charged separately from the gimbal. The new battery grip provides an extended runtime of up to 12 hours, enough for continuous shooting all day. It supports 18W PD fast charging with a charge time of just 2.5 hours. It can even be used while charging to keep RS 4 powered almost indefinitely. SPECIFIKACIJE: Grip Design Single Handgrip (Slanted) Load Capacity 6.6 lb / 3 kg Number of Axes 3: Pitch (Tilt), Roll, Yaw (Pan) Wireless Frequency 2.4 GHz Wireless Protocol Bluetooth 5.0 Mobile App Compatible Yes: Android & iOS App Name: Ronin App Mounting 1 x 1/4"-20 Female x NATO Rail Weight 2.36 lb / 1.07 kg Gimbal Load Capacity 6.6 lb / 3 kg Number of Axes 3: Pitch (Tilt), Roll, Yaw...577,00 €
4.347,41 kn
DJI RS 4 Combo
DJI RS 4 Combo ZNAČAJKE: Lightweight Design with 6.6 lb Payload Combo with Focus Pro Motor OLED Touchscreen with Auto Lock 2nd-Gen Native Vertical Shooting Automated Axis Locks Joystick or Bluetooth Mode Switching Supports Wireless Image Transmitter Teflon-Coated Axes 12-Hour Operation Time Enhanced operation efficiency, native vertical shooting, and an expanded accessory ecosystem make the DJI RS 4 Gimbal Stabilizer Combo a powerful tool for the mirrorless camera shooter. The gimbal only weighs around 2.4 lb and sports a load capacity of 6.6 lb capable of supporting your compact camera build. The combo includes a Focus Pro Motor with a rod mount kit, a focus gear strip, a briefcase handle, and a carrying case. Teflon-coated axes reduce friction for a smoother balancing and operating experience. Other intuitive features include a fine-tuning knob, auto-locking OLED screen, and RSA communication port for use with expanded accessories. Second-Generation Quick Release Plate Design With the familiar dual-layered quick release plates of its predecessor, the RS 4 makes mounting and balancing your camera a breeze. The horizontal plate is newly designed for faster transitions to native vertical shooting. A fine-tuning knob adjusts the tilt axis to move your camera forward or backward. The upper plate has added placement guides for secure camera mounting. Compatibility For a full list of compatible cameras, please see the most current compatibility information on the DJI website. Second-Generation Automated Axis Locks When the gimbal is powered off, you can press and hold the power button, and the three axes unlock while the gimbal expands automatically, allowing you to start working in just two seconds. Press the power button once, and the axes automatically lock and enter sleep mode, making a move or storage significantly more efficient. The second iteration of this design has created smaller gaps when locked to further reduce gimbal shake. RSA Communication Port The RSA communication port allows you to integrate Ronin series accessories into your gimbal configuration. Add Ronin-specific or third-party accessories with control capabilities to switch between different shooting configurations. The DJI RS SDK protocol will allow third-party manufacturers and other developers to create future customized functions for the RS 4. Wireless Shutter Control By implementing Dual-Mode Bluetooth, the RS 4 supports wireless shutter control, saving time and effort with every use. After the initial Bluetooth pairing, you can control video and photo shooting by simply pressing the record button on the stabilizer. Previously paired cameras can automatically reconnect after the first use, eliminating the need for a camera control cable. New DJI Focus Pro Motor Pair the RS 4 with the included Focus Pro Motor using the designated USB-C port. The motor features a 30% increased speed and allows you to focus your lens via dial and zoom via joystick. Integrated Controls By simply sliding the new gimbal mode switch, you can alternate between Pan follow, Pan and Tilt follow, and FPV modes. The FPV mode selection is also customizable to 3D Roll 360, Portrait, or Custom, allowing you to adjust your equipment and get started as fast as possible. Other intelligent features include motion-lapse, track, and panorama. The trigger button can be customized to FPV mode, which causes the three axes to follow the direction of the grip's movement when held down. Fourth-Gen RS Stabilization Algorithm Empowered by a next-generation stabilization algorithm, the RS 4 provided enhanced stability over the RS 3, effortlessly managing vertical shooting, fast-paced movements, and low-angle shots. Auto-Locking OLED Screen The RS 4 is equipped with a fixed OLED touchscreen with a new auto-lock feature. Once locked, the screen will display the current gimbal and joystick moves at a low brightness to prevent accidental switching and conserve battery. Integrated Monitoring and Control Remotely adjust camera exposure directly in the Ronin app, or control the gimbal with the virtual joystick to get an integrated monitoring and control experience. With the Ronin Image Transmitter, a smartphone can be used as a motion controller to remotely control the RS 4 gimbal for more flexible and dynamic camera movements. Enhanced Battery and Fast Charging The RS 4 battery grip features a cartridge design, making it easier to swap batteries and smaller for storage. It can even be charged separately from the gimbal. The new battery grip provides an extended runtime of up to 12 hours, enough for continuous shooting all day. It supports 18W PD fast charging with a charge time of just 2.5 hours. It can even be used while charging to keep RS 4 powered almost indefinitely. SPECIFIKACIJE: Grip Design Single Handgrip (Slanted) Load Capacity 6.6 lb / 3 kg Number of Axes 3: Pitch (Tilt), Roll, Yaw (Pan) Wireless Frequency 2.4 GHz Wireless Protocol Bluetooth 5.0 Mobile App Compatible Yes:...747,00 €
5.628,27 kn
DJI Focus Remote controller for Wireless Follow Focus System (Samo uz kupnju Inspire 1 PRO & RAW)
DJI Focus Remote controller (Samo uz kupnju Inspire 1 PRO & RAW) for Wireless Follow Focus System Up to 330' Line-of-Sight Range Tactile Focus Control Knob Adjustable Endpoints OLED for Status Display / Menu Access The Remote Controller for Focus Wireless Follow Focus System from DJI features a main focus knob to provide the feel of a traditional mechanical follow focus. Adjustable endpoints limit how far the knob will travel, either to set bounds on focus pulls or to workaround photo lenses that lack hard stops. It boasts a wireless range of up to 330' line-of-sight. SPECIFIKACIJA: Frequency 2.415 to 2.473 GHz Range 328.1' / 100 m Transmit Power 14 dBm Battery Model: FB01-554461 Chemistry: Lithium-polymer (LiPo) Capacity: 1700 mAh / 6.29 Wh Voltage: 3.7 V Operating Temperature -4 to 131°F / -20 to 55°C Dimensions 6 x 3.4 x 3.5" / 153 x 86 x 90 mm Weight 1.6 lb / 745 g1.021,04 €
7.693,03 kn
DJI Focus Remote controller for Wireless Follow Focus System
DJI Focus Remote controller for Wireless Follow Focus System Up to 330' Line-of-Sight Range Tactile Focus Control Knob Adjustable Endpoints OLED for Status Display / Menu Access The Remote Controller for Focus Wireless Follow Focus System from DJI features a main focus knob to provide the feel of a traditional mechanical follow focus. Adjustable endpoints limit how far the knob will travel, either to set bounds on focus pulls or to workaround photo lenses that lack hard stops. It boasts a wireless range of up to 330' line-of-sight. SPECIFIKACIJA: Frequency 2.415 to 2.473 GHz Range 328.1' / 100 m Transmit Power 14 dBm Battery Model: FB01-554461 Chemistry: Lithium-polymer (LiPo) Capacity: 1700 mAh / 6.29 Wh Voltage: 3.7 V Operating Temperature -4 to 131°F / -20 to 55°C Dimensions 6 x 3.4 x 3.5" / 153 x 86 x 90 mm Weight 1.6 lb / 745 g1.123,23 €
8.462,98 kn
DJI Focus Wireless Follow Focus System (S daljinskim upravljačem, uz kupnju Ronin & Ronin-M stabilizatora)
DJI Focus Wireless Follow Focus System S daljinskim upravljačem, SAMO uz kupnju Ronin & Ronin-M stabilizatora Control Angle Accuracy:±0.002° Brushless Motor and Receiver in One Unit Up to 330' Line-of-Sight Range Adjustable Endpoints Works with Ronin and Ronin-M Works with Zenmuse X5 or X5R Cameras Fits Standard 15mm and 19mm Rods Built-In Rosette Mount DJI's Focus is a wireless follow focus that integrates natively with the Zenmuse Z5 series of camera/gimbals systems and can be mounted on rigs equipped with 15mm or 19mm rods - including the Ronin and Ronin-M gimbals. The Focus features a handheld remote controller (transmitter) with a focus knob to give to the feel of a traditional mechanical follow focus. The wireless system sports a range of up to 330' line-of-sight with a delay of only 14ms. Control accuracy of ±0.002° Self-contained drive unit combines brushless motor and receiver in a single module - simplifying installation and requiring only a single power source Use with Inspire 1 Quadcopter carrying Zenmuse X5 or X5R camera Adjustable endpoints - ideal for lenses, such as photo lenses, that lack "hard" stops Programmable focus points and other parameters adjustable through controller menu OLED display on controller for menu access and status display Compatible with DJI's Ronin and Ronin-M gimbals Works with third-party gimbals or rigs that have 15mm or 19mm rod support Dual communication ports for future upgrades Built-in rosette for greater mounting flexibility SPECIFIKACIJE: Motor Maximum Speed 192 rpm Maximum Torque 0.26 Lb-In / 0.35 Nm Mounting 19 mm or 15 mm rods Gear Module: 0.8 Teeth: 40 Noise <25 dB (at 96 rpm) Power Consumption Static Current: 80 mA (at 12 V) Stall Current: 2.5 A (at 12 V) Power Requirements 9 to 16 VDC Dimensions 3.5 x 2 x 1" / 90 x 50 x 26 mm Weight 6 oz / 170 g Controller Battery Model: FB01-554461 Chemistry: Lithium-polymer (LiPo) Capacity: 1700 mAh / 6.29 Wh Voltage: 3.7 V Dimensions 6 x 3.4 x 3.5" / 153 x 86 x 90 mm Weight 1.6 lb / 745 g Radio System Frequency 2.415 to 2.473 GHz Range 328.1' / 100 m Transmit Power 14 dBm General Operating Temperature -4 to 131°F / -20 to 55°C1.736,41 €
13.082,98 kn
DJI Focus (With a remote controller) Wireless Follow Focus System
DJI Focus (With a remote controller) Wireless Follow Focus System Control Angle Accuracy:±0.002° Brushless Motor and Receiver in One Unit Up to 330' Line-of-Sight Range Adjustable Endpoints Works with Ronin and Ronin-M Works with Zenmuse X5 or X5R Cameras Fits Standard 15mm and 19mm Rods Built-In Rosette Mount DJI's Focus is a wireless follow focus that integrates natively with the Zenmuse Z5 series of camera/gimbals systems and can be mounted on rigs equipped with 15mm or 19mm rods - including the Ronin and Ronin-M gimbals. The Focus features a handheld remote controller (transmitter) with a focus knob to give to the feel of a traditional mechanical follow focus. The wireless system sports a range of up to 330' line-of-sight with a delay of only 14ms. Control accuracy of ±0.002° Self-contained drive unit combines brushless motor and receiver in a single module - simplifying installation and requiring only a single power source Use with Inspire 1 Quadcopter carrying Zenmuse X5 or X5R camera Adjustable endpoints - ideal for lenses, such as photo lenses, that lack "hard" stops Programmable focus points and other parameters adjustable through controller menu OLED display on controller for menu access and status display Compatible with DJI's Ronin and Ronin-M gimbals Works with third-party gimbals or rigs that have 15mm or 19mm rod support Dual communication ports for future upgrades Built-in rosette for greater mounting flexibility SPECIFIKACIJE: Motor Maximum Speed 192 rpm Maximum Torque 0.26 Lb-In / 0.35 Nm Mounting 19 mm or 15 mm rods Gear Module: 0.8 Teeth: 40 Noise <25 dB (at 96 rpm) Power Consumption Static Current: 80 mA (at 12 V) Stall Current: 2.5 A (at 12 V) Power Requirements 9 to 16 VDC Dimensions 3.5 x 2 x 1" / 90 x 50 x 26 mm Weight 6 oz / 170 g Controller Battery Model: FB01-554461 Chemistry: Lithium-polymer (LiPo) Capacity: 1700 mAh / 6.29 Wh Voltage: 3.7 V Dimensions 6 x 3.4 x 3.5" / 153 x 86 x 90 mm Weight 1.6 lb / 745 g Radio System Frequency 2.415 to 2.473 GHz Range 328.1' / 100 m Transmit Power 14 dBm General Operating Temperature -4 to 131°F / -20 to 55°C2.229,61 €
16.799,00 kn
DJI Ronin 2 Professional Combo motorizirani stabilizator za video snimanje 3D Gimbal 3-Axis Handheld Aerial Stabilizer
DJI Ronin 2 Professional Combo motorizirani stabilizator za video snimanje 3D Gimbal 3-Axis Handheld Aerial Stabilizer ZNAČAJKE: For DSLRs / Cinema Cameras 30-Pound Payload Capacity Enhanced SmoothTrack Algorithm and GPS Upright, Underslung, and Briefcase Modes Easy Underslung/Upright Transitions 2-Axis Mode for Use with Steadicam Retractable Feet/Self-Supporting Design Camera Control for Select Cameras 2.4 / 5.8 GHz Switchable Remote Up to 0.6-Mile Control Range The versatile Ronin 2 gimbal from DJI is suitable for use handheld, or mounted in a variety of ways, including to a drone, Steadicam, vehicle mount, and more. An update from the original Ronin, this motorized stabilization system is suitable for a range of camera and lens configurations, boasting a payload capacity of 30 pounds. This means it can be used for everything from DSLRs up to cinema cameras such as the Arri Alexa Mini and Sony FS7. Like its predecessor, the Ronin 2 features support for Underslung, Upright, and Briefcase operation modes to help you achieve the best angle. However, it has been redesigned to enable easy transition between Upright and Underslung modes without changing the position of the camera. It also offers several other improvements, such as enhancements to the control software and physical design to simplify taking complex shots without sacrificing performance, all while making important functions more readily accessible. Performance Upgraded high torque motors allow the gimbal to support a wider range of cameras, resist high winds and G-forces caused when mounted to a car, and keep it moving smoothly in flight. Boosted Torque With up to eight times more powerful motors than previous iterations, Ronin 2 can withstand sustained speeds of over 75 mph with camera builds as heavy as 30 pounds. Thanks to encoded motors and enhanced precision, the Ronin maintains the same 0.02° of accuracy of its predecessors. Versatility Detachable Grip A detachable grip allows Ronin 2 to stand up on its own and is easily separated when the lower part of the handgrip is not needed. In addition to handheld work, the Ronin 2 supports mounting on cable cams, drones, Steadicams, vehicle mounts, and more. Simplified Operation Easier Setup Making fine adjustments, which is essential for proper camera balancing, is now simplified with integrated adjustment knobs and a re-designed camera mounting base. Integrated Screen A dedicated high-brightness touchscreen for settings and adjustments has been integrated into Ronin 2, streamlining and accelerating gimbal setup. Tactile buttons including motor pause are placed easily within reach. Assistant App The extensively refined, redesigned, and expanded Gimbal Assistant app, helps to create content with minimum effort via new features such as CamAnchor, Time-Lapse, and Panorama, providing a more intuitive and easier to use full control system for Ronin 2. Intelligent Enhanced intelligence means filmmakers can get shots with Ronin 2 that would once have needed specialist expertise or additional equipment, from total smoothness control to studio-oriented smart features. Intelligent features include Panorama, Time-Lapse, and CamAnchor modes. Powering Hot-Swap Batteries Two batteries on Ronin 2, and the ability to run with only one, allows batteries to be charged and swapped without interrupting a shoot. Accessory Support The Ronin power hub enables essential accessories, such as DJI Focus and wireless video transmission systems, to be powered by the Ronin 2 battery as well as communicate with the gimbal controller. Design Integrated GPS The built-in GPS provides Ronin 2 with essential information for gimbal acceleration and speed, which is crucial for maintaining the camera's position and the horizon level when moving at high speeds while mounted to a vehicle or drone. Robust Batteries Robust and resilient in extreme weather conditions, Ronin 2's self-heating batteries ensure stable power output for high-performance in temperatures as low as -4°F and high heat environments. Dual batteries capable of operating simultaneously and independently provide complete redundancy, keeping the shoot going. Compatible Cameras The Ronin 2 supports a range of cameras from DSLRs to cinema cameras, even with high-grade lenses and other accessories mounted. Compatible camera/lens configurations include: RED DRAGON Angenieux Optimo Anamorphic 6-152 A-2S ARRI Master Prime lenses up to 150mm ARRI Master Anamorphic lens Canon CN7x17 KAS S 17-120mm T2.95 ARRI ALEXA Mini Angenieux Optimo Anamorphic 56-152 A-2S ARRI Master Prime lenses up to 150mm ARRI Master Anamorphic lens Canon CN7x17 KAS S 17-120mm T2.95 Blackmagic URSA Mini Angenieux Optimo Anamorphic 56-152 A-2S ARRI Master Prime lenses up to 150mm Fujinon ZK19-90mm T2.9 Canon CN7x17 KAS S 17-120mm T2.95 Canon C300 Canon CN7x17 KAS S 17-120mm T2.95 Canon CN-E Prime lenses Canon EF lenses up to 400mm Zeiss Compact Zoom lenses Sony FS7 Sony CineAlta 4K lens series E-Mount...6.357,29 €
47.899,00 kn
- Raspoloživo, isporuka odmah u trgovini
- Raspoloživo, isporuka do 2 dana po uplati
- U dolasku, po narudžbi
- Raspoloživost potrebno provjeriti
- Nije raspoloživo
Ocjene i komentari
Proizvod još nije ocijenjen, promijeni to!
Posjetitelje koji su gledali ovaj proizvod također su zanimali i proizvodi