DJI Zenmuse H3-3D Standard Gimbal for GoPro HERO3/3+ (Standard) gyroscope zenmuse
Cijena
317,47 €
Stavi u listu želja
Postavi obavijest o cijeni
Povijest najniže cijene
Podijeli
Prijavi grešku
DJI Zenmuse H3-3D Standard Gimbal for GoPro HERO3/3+ (Standard) gyroscope zenmuse
DJI Zenmuse H3-3D Standard Gimbal for GoPro HERO3/3+ (Standard) Keeps Aerial Shots Level and Stabilized 3-Axis Brushless Gimbal Camera Tilt w/ ±0.08° Accuracy Designed for HERO3/HERO3+ Gimbal Control Unit Included The Zenmuse H3-3D 3-Axis Gimbal for GoPro HERO3/3+ from DJI is a camera stabilization device for use on select multi-rotor RC aircraft. It is driven by a 3-axis brushless gimbal that not only supports tilting and canting, like the previous H3-2D model, but also panning as well. Not only will it keep your aerial video's horizon level and isolated from vibration, the gimbal can also be used to remotely operate there camera, allowing you to adjust the camera angle with ±0.08° accuracy in flight. Note: This system is balanced for the naked, unmodified GoPro HERO3 and HERO3+ action cameras only. Camera add-ons such as filters or housings will throw off the balance and could damage the gimbal. Additional, when used with the HERO4 it may not perform optimally. Gimbal control unit (GCU) included Brushless servo control Aluminum allow body Built-in IMU module Based on Zenmuse technology SPECIFIKACIJA: Performance Controlled Angle Accuracy Tilt/Roll: ±0.02° Yaw: ±0.03° Maximum Controlled Rotation Speed Tilt Axis: ±130°/s Controlled Rotation Range Tilt Axis Control: -130 to +45° General Supported Flight Control Systems A2, WKM, NAZA-M, NAZA-M V2, PHANTOM 2 Operating Current Consumption Static Current: 400 mA at 12 V Dynamic Current: 600 mA at 12 V Power Requirements 3 to 6S (12 to 26 V) System Requirements For Assistant Software: Windows 8, 7, Vista, or XP SP3 Operating Temperature 50 to 122°F / 10 to 50°C Dimensions Gimbal 3.8 x 3.7 x 2.89" / 97 x 95 x 73 mm GCU: 1.7 x 1.3 x 0.4" / 42 x 32 x 9.3 mm Weight Gimbal: 5.9 oz / 168 g -- without camera GCU: 0.8 oz / 22 g Komplet sadrži: Damping Unit Upper Bracket for Zenmuse H3-3D Gimbal (Part 48) Damping Rubber for Zenmuse H3-2D / H3-3D / H4-3D Gimbal (Part 44, 4-Pack) 4 x Securing Kits DJPZM000062 CAN-Bus Cable DJCPZM000069
317,47 €
- Raspoloživo, isporuka odmah u trgovini
- Raspoloživo, isporuka do 2 dana po uplati
- U dolasku, po narudžbi
- Raspoloživost potrebno provjeriti
- Nije raspoloživo
Ocjene i komentari
Posjetitelje koji su gledali ovaj proizvod također su zanimali i proizvodi