HPE 1950-48G-2SFP+-2XGT Switch
Stavi u listu želja
Postavi obavijest o cijeni
Povijest najniže cijene
Podijeli
Prijavi grešku
48+4P HP Enterprise OfficeConnect 1950 48G 2SFP+ 2XGT Switch
HPE OfficeConnect 1950 48G 2SFP+ 2XGT, Managed, L3, Gigabit Ethernet (10/100/1000), Rack Mount, 1U HPE OfficeConnect 1950 48G 2SFP+ 2XGT. Switch type: Managed, Switch level: L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Number of basic switching RJ-45 Ethernet ports: 48, Console port: RJ-45. MAC address table: 16384 entries, routing/switching capacity: 176 Gbit/s. Network standard: IEEE 802.3, IEEE 802.3ab, IEEE 802.3u. Rack installation, form factor: 1U The HPE 1950 Switch Series is a line of intelligent web-managed Gigabit switches with 10GbE uplinks for small businesses that require advanced, high-performance connectivity. The series includes 2 standard and 2 PoE+ models, 24 and 48 GbE ports, each with 2 high-bandwidth 10GBASE-T and 2 10G SFP+ ports. True stacking of up to 4 devices allows them to be logically managed as a single unit. The switches support static Layer 3 routing for IPv4 and IPv6. Other advanced features include ACLs, 802.1X, STP, RSTP, and MSTP. Limited lifetime warranty covers unit, fans, and power supplies. functions Gigabit at the highest level with 10GbE network for progressive small businesses. - Each HPE 1950 Switch Series model includes four 10GbE connections for connecting to servers, network storage devices, or other switches. - Two 10GBASE-T links deliver 10GbE performance over Category 6a copper cabling for simple, cost-effective, high-bandwidth connections over a maximum distance of 100 meters. - Two SFP+ ports enable fiber optic connections over various distances at 1/10GbE speeds with optional SFP+ 10GbE or SFP Gigabit transceivers. - Aggregate 10GbE connections for even greater bandwidth with Link Aggregation Control Protocol. Simplified network management - Logically group or “stack“ up to four HPE 1950 Switch Series units and manage them as a single unit to greatly simplify network management. Connect stacked units using 10GbE links, with up to a total of 40GbE stacking bandwidth for the connected units. - Use the intuitive web browser-based interface to configure and manage these intelligently managed devices. - These devices support SNMP versions 1, 2c and 3, allowing these devices to be managed through an SNMP-based remote management platform. - Network Time Protocol simplifies time tracking across your network so that timed actions and troubleshooting logs remain synchronized. - Units automatically obtain an IP address from a DHCP server, enabling near-instant deployments. Reliable security to protect your network - The HPE 1950 Switch Series enables you to use virtual LANs and ACLs to restrict what data can be viewed by which users. - Use 802.1X with a RADIUS server to ensure that only known and authorized users can access your network. - Various features protect your network from user or server spoofing and malicious network attacks. - Ensure secure traffic management with supported SSL/HTTPS encryption and SNMPv3 capabilities. Resilience features to keep your network up and running - The HPE 1950 Switch Series supports Spanning Tree Protocol, Rapid Spanning Tree Protocol, and Multiple Spanning Tree Protocol standards for creating ready-to-use recovery connections. - Distribute important connections across multiple units in a logical stack for greater reliability. Units can also be located in different buildings and still be logically stacked. - Devices support two independent primary and secondary operating system flash images for backup and recovery during unit upgrades. - Power-over-Ethernet (PoE) models can be combined with an optional redundant power supply system that maintains power even if the unit“s power supply fails, supplementing the available PoE power up to 780 watts. management functions Switch Type: Managed Switch level: L3 Feature: Quality of Service (QoS) Support Feature: Web-based management connections and interfaces Number of base-switching RJ-45 Ethernet ports: 48 Basic Switching RJ-45 Ethernet Ports Type: Gigabit Ethernet (10/100/1000) Number of SFP+ module slots: 2 Console port: RJ-45 network Network standard: IEEE 802.3, IEEE 802.3ab, IEEE 802.3u Feature: 10G support Copper Ethernet cabling technology: 10BASE-T, 100BASE-TX, 1000BASE-T Property: Port Mirroring Feature: Support data flow control Property: Broadcast Storm Control Property: Rate Limiting Feature: Auto MDI/MDI-X Property: Spanning Tree Protocol Feature: VLAN support data transfer Routing/switching capacity: 176 Gbit/s passage: 130.9 Mpps MAC address table: 16384 entries Latency (10-100 Mbps): 5 µs Latency (1 Gbps): 5 µs Latency (10 Gbps): 1.5 µs Feature: Jumbo Frames Support Data packet buffer memory: 3 MB Security DHCP functions: DHCP client Property: Access Control List Property: IGMP snooping Feature: SSH/SSL support design Feature: Rack installation Feature: Stackable Form factor: 1U Product color: Gray services Virtual Stacking (units): 4 Memory type: SDRAM Storage capacity: 1024 MB Flash memory: 128 MB energy Feature: Power supply...
551,00 €
HPE 1950-48G-2SFP+-2XGT Switch
JG961A
570,79 €
HP Gigabit 48-portni upravljač s web-upravljanjem 1950-48G-2SFP + -2XGT (JG961A) [mit Festanschluss]
Brzina prijenosa: 10/100/1000 Mbps portovi: 48x Ethernet i 2x SFP mogućnosti: Inteligentni centar za upravljanje Značajke: 10G mreža za napredna poduzeća Switch svojstva Sloj - 3 Vrsta upravljanja - pametno upravljano Prekidački kapacitet - 176 Gbps Faktor oblika - 19 " Autonomno pregovaranje - Da Reckmount - Da Slaganje - Da Ventilator - ne sučelja Ethernet 1000 Mbps - 48 Ethernet 10Gb / s - 2 Ostale veze - 2x SFP + 10Gb / s Dimenzije i težina 440 mm x 44 mm x 270 mm / 5000 grama garancija Jamstvo - 30-godišnje jamstvo proizvođača
740,00 €
- Raspoloživo, isporuka odmah u trgovini
- Raspoloživo, isporuka do 2 dana po uplati
- U dolasku, po narudžbi
- Raspoloživost potrebno provjeriti
- Nije raspoloživo
Ocjene i komentari
Posjetitelje koji su gledali ovaj proizvod također su zanimali i proizvodi