Katalozi Savjeti Lista želja 0

NFO 11-hole crossbar (bracket) with adjustable mounting on a rectangular pole NFO-TOOL-80051-SET

Cijena od 16,25 € do 99,19 €
NFO 11-hole crossbar (bracket) with adjustable mounting on a rectangular pole NFO-TOOL-80051-SET
Stavi u listu želja
Postavi obavijest o cijeni
Povijest najniže cijene
Podijeli
Prijavi grešku
Gdje kupiti 2 Komentari 0 Povezani proizvodi

NFO 11-hole crossbar (bracket) with adjustable mounting on a rectangular pole NFO-TOOL-80051-SET

NFO 11-hole crossbar (bracket) with adjustable mounting on a rectangular pole - The construction of the set enables, among others, mounting all types of extraction, through and screw holders. Adjustable mounting system in the range of 100-500 mm will allow installation of the crossbar on most rectangular columns. The crossbar is screwed to two angles (fastening to the pole) with two screws. The angles have special holes that allow mounting the set to the pole using two metal bands (maximum width of the band - 20 mm) In the set: 11-hole crossbar, Adjustable mounting system (angles), Mounting screws: M14 (x2), Nuts: M14 (x2) Bracket dimensions:Length 440 mm Width: 40 mm Height: 40 mm Thickness: 4 mm Number of holes: 2x11 Hole diameter: 16 mm Više informacija na linku
Raspoloživo, isporuka do 2 radna dana nakon uplate
16,25 €
Stavi u listu želja
U trgovinu
H2 Shop

NFO 11-hole crossbar (bracket) with adjustable mounting on a rectangular pole NFO-TOOL-80051-SET

NFO 11-hole crossbar (bracket) with adjustable mounting on a rectangular pole - The construction of the set enables, among others, mounting all types of extraction, through and screw holders. Adjustable mounting system in the range of 100-500 mm will allow installation of the crossbar on most rectangular columns. The crossbar is screwed to two angles (fastening to the pole) with two screws. The angles have special holes that allow mounting the set to the pole using two metal bands (maximum width of the band - 20 mm) | In the set: 11-hole crossbar, Adjustable mounting system (angles), Mounting screws: M14 (x2), Nuts: M14 (x2) | Bracket dimensions:Length 440 mm | Width: 40 mm | Height: 40 mm | Thickness: 4 mm | Number of holes: 2x11 | Hole diameter: 16 mm
Raspoloživo
99,19 €
Stavi u listu želja
U trgovinu
  • Raspoloživo, isporuka odmah u trgovini
  • Raspoloživo, isporuka do 2 dana po uplati
  • U dolasku, po narudžbi
  • Raspoloživost potrebno provjeriti
  • Nije raspoloživo
Nabava.net nije internet trgovina već mjesto na kojem možete pregledati i usporediti ponudu drugih trgovina za NFO 11-hole crossbar (bracket) with adjustable mounting on a rectangular pole NFO-TOOL-80051-SET. Iako se podaci osvježavaju nekoliko puta dnevno savjetujemo da se prije kupovine detaljnije informirate direktno kod trgovine koju ste odabrali za kupnju proizvoda NFO 11-hole crossbar (bracket) with adjustable mounting on a rectangular pole NFO-TOOL-80051-SET. Nabava.net ne jamči za točnost objavljenih informacija, kao i to da prikazane slike u potpunosti odgovaraju stvarnim proizvodima.
Ocjene i komentari
Posjetitelje koji su gledali ovaj proizvod također su zanimali i proizvodi