DJI Matrice 600 dron + M600 Battery Case + M600 DJI Hex Charger
Cijena
4.645,17 €
Stavi u listu želja
Postavi obavijest o cijeni
Povijest najniže cijene
Podijeli
Prijavi grešku
DJI Matrice 600 dron + M600 Battery Case + M600 DJI Hex Charger
DJI Matrice 600 dron + M600 Battery Case + M600 DJI Hex Charger ZNAČAJKE: Designed for filmmakers and industrial applications Multiple gimbals supported including the Ronin-MX A3 and Lightbridge 2 built-in Extended flight time and long range transmission Professional HD transmission Powerful app control SDK supported Upgradeable with A3 PRO and D-RTK GNSS Supporting a total takeoff weight of 33.2 pounds, the Matrice 600 (M600) is a hexacopter from DJI designed for professional video and industrial imaging applications. It is centered around DJI's advanced A3 flight control system and incorporates the Lightbridge 2 system for HD resolution, low-latency monitoring via SDI, HDMI, and USB outputs on the controller. For camera support, the M600 works with Zenmuse Z15 series gimbals, the Ronin-MX gimbal, and Zenmuse X Series gimbal/camera hybrids. The M600 comes almost-ready-to-fly (ATF), including controller (transmitter), flight batteries, charger, flight controller, and sundries. Additional hardware needed may include a gimbal, camera, as well as any flight controller add-ons. Some assembly is required. Performance Intelligent Drive System The M600 uses sine-wave driven, intelligent ESCs to ensure it performs accurately, safely, and efficiently, while the A3 flight controller's self-adaptive systems adjust flight parameters automatically based on different payloads Air System Design Modular Design The modular design makes the Matrice 600 easy to set up and ready to use Gimbal Compatibility All Zenmuse cameras and gimbals are natively compatible, and a maximum payload of 13.2 lb allows it to fly the Ronin-MX gimbal and a range of cameras, from Micro Four Thirds systems to the RED EPIC Built to Last A dust-proof propulsion system simplifies maintenance, while actively cooled motors make for reliable operation for extended periods of time A3 Flight Controller GNSS-based A3 acts as the brains of the aircraft. Using data from the GPS, compass, and various sensors, it provides navigation a stabilization with varying degrees of autopilot redundancy, depending on user settings. An array of expansion ports allows you to connect optional DJI and third-party equipment DJI GO App for iOS and Android The M600 supports the DJI GO app as well as the DJI Assistant 2. Get a live HD view, battery status, redundancy status, transmission strength and much more, straight from the DJI GO app. DJI GO is also the control center for the camera, giving access to shutter speed, ISO, photo or video capture on any Zenmuse X series camera and remote focus and aperture on the Zenmuse X5 and X5R cameras. The DJI Assistant 2 supports firmware updates and the new Ground Station, and comes with a built-in flight simulator Extended Range The Matrice 600's radio range extents to 3.1 miles with a clean signal A3 Pro Upgrade The separately available A3 Pro upgrade brings triple redundancy to the Matrice 600's flight controller. It features diagnostic algorithms that compare sensor data from the three sets of units in real-time, helping ensure the aircraft flies as expected, especially important in professional filmmaking and industrial environments D-RTK GNSS Upgrade The A3 GNSS system can be upgraded with separately available Real-Time Kinematic technology (RTK) for even greater navigational accuracy. Using dual antennas, RTK provides greater precision than a compass and is not susceptible to magnetic interference from metal structures Lightbridge 2 Professional HD Transmission DJI Lightbridge 2 has been designed from the ground up to meet the requirements of professional broadcasting, offering high frame rates and HD live streaming. USB, mini-HDMI, and 3G-SDI ports on the controller support video output at up to 1080p/60 fps or a broadcast standard output of 720p/59.94 fps and 1080i/50 fps DJI SDK The M600 is fully compatible with the DJI Onboard SDK and Mobile SDK to meet the requirements of those building software for industrial applications. It has a dual parallel CAN and API ports for connecting DJI devices, including the Guidance sensor system, the RTK GNSS units, or third party components of your choice SPECIFIKACIJE: Performance Maximum Speed Horizontal (No Wind): 59.1 ft/s / (18 m/s) Ascent: 16.4 ft/s (5 m/s) Descent: 9.8 ft/s (3 m/s) Maximum Wind Resistance 26.2 ft/s (8 m/s) Maximum Altitude Above Sea Level: 8202.1' / 2500 m Hovering Accuracy P-Mode with GPS: Vertical: ±1.6' / 0.5 m Horizontal: ±4.9' / 1.5 m Maximum Angular Velocity Pitch: 300°/s Yaw: 150°/s Maximum Pitch Angle 25° Hovering Time Six TB47S Batteries: No payload: 35 minutes 13.2 lb / 6 kg Payload: 16 minutes Six TB48S Batteries: No payload: 40 minutes 12.1 lb / 5.5 kg payload: 18 minutes Note: Hovering time is based on flying at 32.8' / 10 m above sea level in a no-wind environment and landing with 10% battery level. Takeoff Weight Up to 33.2 lb / 15.1 kg Flight Control System Model A3 Transmitter Frequency 5.725 to 5.825 GHz 2.400 to 2.483 GHz Communication Distance...4.645,17 €
34.999,03 kn
- Raspoloživo, isporuka odmah u trgovini
- Raspoloživo, isporuka do 2 dana po uplati
- U dolasku, po narudžbi
- Raspoloživost potrebno provjeriti
- Nije raspoloživo
Ocjene i komentari
Proizvod još nije ocijenjen, promijeni to!
Posjetitelje koji su gledali ovaj proizvod također su zanimali i proizvodi