DJI Z15 A7 Zenmuse 3-Axis Gimbal Gyroscope for Sony a7S / a7R
Cijena
1.220,92 €
Stavi u listu želja
Postavi obavijest o cijeni
Povijest najniže cijene
Podijeli
Prijavi grešku
DJI Z15 A7 Zenmuse 3-Axis Gimbal Gyroscope for Sony a7S / a7R
DJI Z15 A7 Zenmuse 3-Axis Gimbal Gyroscope for Sony a7S / a7R Stabilizes Camera and Keeps Shot Level Control Angle Accuracy:±0.01° Variable Speed 360° Panning Tilts up to +50°:/-140° Rolls up to ±40° Integrated IMU Module Remote Shutter Release Operation Three Selectable Control Modes For A2 and WooKong-M Flight Controllers For Octo-rotor Such as S1000 and S800 The Zenmuse Z15-A7 3-Axis Gimbal for Sony a7S / a7R from DJI performs two key functions: keeping the camera level and providing stabilization, thus helping you transform a larger multi-rotor UAV, such as the S1000+ or S900, into a platform for professional aerial video and aerial photography. Featuring ±0.01° control angle accuracy, the Zenmuse Z15-A7supports three operation modes; two optimized for aerial video and photo use and one for FPV (first person view) applications. The gimbal is operated using a dedicated stick on your transmitter (hand-held radio controller), and the receiver must have at least four free channels that can be assigned to gimbal operation. Each version of the Z15 Gimbal is designed for a specific camera and lens combination. This version is for the Sony a7S / a7R with the Sony FE 35mm f/2.8 ZA lens. Additionally, it is specifically balanced for this precise setup. Additions to the camera or lens, such as filters, can increase the weight and alter the weight distribution potentially damaging the gimbal. Note: Installation may require soldering. Compatible Hardware The Z15 Gimbal requires a larger multi-rotor UAV aircraft, such as the S1000+ or S900, that has installed either the A2 or WooKong-M flight control system. Depending on the system, the Z15 Gimbal is installed in, additional separately available electronics and mounting hardware may be required. apart from the flight control system, the receiver must have at least four open channels, and the transmitter must be programmable to support gimbal operation 3-Axis Rotation Control The control method is designed to be simple and intuitive: the gimbal-assigned transmitter stick has direct control over the relative rotation speed. The design incorporates a tail potentiometer to increase control, stability, and precision, and the internal slip rings avoid needlessly complicated wiring. Both the power and signal lines are integrated into the tubes of the gimbal, which provides unhindered control axes, allowing the gimbal to pan and tilt ±360° and roll ±40° Multiple Control Modes Orientation-locked Control Mode: Keeps the gimbal locked with the aircraft nose direction Non-Orientation-locked Control Mode: Gimbal point stays the same regardless of which way the nose is pointing Back to Mid-point Mode (FPV Mode): Centrally locks the gimbal in the direction of the nose. In this mode the leveling and stabilizing functionality of the gimbal is negated Built-in Independent IMU Integration of the IMU Module helps reduce the amount of wiring required for installation. Plus, the gimbal provides a specially designed and customized video output module Gimbal Servo Drive Module Following in the tradition of previous Zenmuse gimbals, the Z15 features high precision control characteristics demanded by professional users. With high precision, low vibration, and high torque characteristics, this module helps provides additional camera stabilization Windows Assistant Software Firmware updates, diagnostic testing, and other critical maintenance will require the use of the computer-based Assistant Software. This software requires Windows 8, 7, XP SP3 in 32- or 64-bit versions Camera Shutter Control Supported With a properly configured transmitter it is possible to trigger the camera's shutter release remotely at the ground-end thanks to the integrated shutter control module Video Output for Wireless Transmission A video feed from the Sony a7S / a7R's HDMI or AV port is relayed through the gimbal so that it can be connected to a video transmitter or OSD module for FPV and ground-end monitoring SPECIFIKACIJA: Peripheral Supported Camera Sony a7S / a7R Supported Lens Sony FE 35mm f/2.8 ZA Control Requirements At least 4 spare receiver channels S-Bus/PPM receiver supported Software Requirements For Assistant Software: Windows 8, 7, XP SP3 -- 32 or 64-bit Electrical Characteristics Working Current Static Current: 200 mA at 25 V Dynamic Current: 400 mA at 25 V Locked-Rotor Current: 4 A at 25 V GCU BEC Output 10 A at 12 V Transmit Power GCU Wireless Video Transmission: 1 A at 12 V Performance Load Weight (Reference Value) 1.4 lb / (622 g) with Sony a7S, FE 35mm f/2.8 ZA lens, battery, lens hood, and SD Card 1.3 lb (580 g) with Sony a7SR, FE 35 mm f2.8 ZA lens, battery, lens hood, and SD Card Controlled Angle Accuracy ±0.01° Maximum Controlled Rotation Speed Pan Axis: ±130°/s Tilt Axis: ±130°/s Roll Axis ±30°/s Controlled Rotation Range Pan Axis Control: ±360° continuous rotation Tilt Axis Control: +50°:/-140° Roll Axis Control: ±40° General Power Requirements GCU: 4S to 12 S LiPo (6S if using S800,...
1.220,92 €
9.199,02 kn
- Raspoloživo, isporuka odmah u trgovini
- Raspoloživo, isporuka do 2 dana po uplati
- U dolasku, po narudžbi
- Raspoloživost potrebno provjeriti
- Nije raspoloživo
Ocjene i komentari
Proizvod još nije ocijenjen, promijeni to!
Posjetitelje koji su gledali ovaj proizvod također su zanimali i proizvodi