DJI Ronin-S
Stavi u listu želja
Postavi obavijest o cijeni
Povijest najniže cijene
Podijeli
Prijavi grešku
DJI Ronin-S Spare Part 10 Cheese Plate (CP.RN.00000016.01)
DJI Ronin-S Spare Part 10 Cheese Plate (CP.RN.00000016.01) ZNAČAJKE: Attaches to the Side of Ronin-S Secures Vertically or Horizontally 2 x M4 Threads for DJI Accessories 2 x 1/4"-20 Threads for Arms, Etc. The DJI Ronin-S Cheese Plate is designed to attach to the side of the Ronin-S to support various accessories. Featuring six non-threaded M4 mounting holes around the edges, the plate can be secured on the side of the gimbal vertically or horizontally. Two M4 screws come included. Two threaded M4 mounting holes allow you to attach select DJI accessories that use M4 screws, and two threaded 1/4"-20 mounting holes support articulating arms and other 1/4"-20 accessories. UKLJUČUJE: DJI Ronin-S Cheese Plate 2 x M4 Screw
19,78 €
DJI Ronin-S Spare Part 07 Camera Riser (CP.RN.00000013.01)
DJI Ronin-S Spare Part 07 Camera Riser (CP.RN.00000013.01) ZNAČAJKE: Increases Camera Height Position Attaches to Bottom of Camera The DJI Ronin-S Camera Riser allows you to increase the height position of your camera on the Ronin-S. The riser attaches to the bottom of your camera and then mounts onto the gimbal's camera mounting plate. UKLJUČUJE: DJI Ronin-S Camera Riser
19,78 €
DJI Ronin-S Spare Part 04 IR Control Cable (CP.RN.00000009.01)
DJI Ronin-S Spare Part 04 IR Control Cable (CP.RN.00000009.01) ZNAČAJKE: Sync Ronin-S & Cameras with IR Receiver Enable Camera Control from the Gimbal 11.8" Length Connects into RSS Port The DJI Ronin-S IR Control Cable is designed to connect the Ronin-S with cameras that have an IR receiver to enable camera control from the gimbal. Using the gimbal's camera control button, you can trigger functions such as video recording, photo capture, and more. Connect one end of the cable into the RSS port of the gimbal, and then point the diode on the other end toward the camera's IR receiver to enable the connection. The cable is 11.8" long. SPECIFIKACIJE: Length 11.8" / 30 cm UKLJUČUJE: DJI Ronin-S IR Control Cable
19,78 €
Cheese Plate za DJI Ronin stabilizatore
Univerzalni nosač (Cheese Plate) za DJI Ronin-S proširuje funkcionalnost stabilizatora. Omogućuje vam pričvršćivanje drugih dodataka (kompatibilnih s 1/4"-20 nosačem) kao što je GPS modul ili DJI Pro bežični prijemnik. Nosač je moguće instalirati na gornji nosač ili preko bočnog M4 konektora.< /span>
30,47 €
DJI Care Refresh (Ronin-S) Garancija
DJI Care produženo osiguranje za Ronin-S stabilizator.
39,45 €
DJI Ronin-S Spare Part 08 Battery Adapter (CP.RN.00000014.01)
DJI Ronin-S Spare Part 08 Battery Adapter (CP.RN.00000014.01) ZNAČAJKE: Charge Ronin-S Grip Removed from Gimbal Also Allows Using Grip as Power Bank The DJI Ronin-S Battery Adapter allows you to charge the Ronin-S grip handle by connecting it directly to a power outlet. You won't need to keep the grip attached to the gimbal. Remove the gimbal and slide the Battery Adapter on top of the grip in its place. Then connect a USB cable (not included) into the USB Type-C port of the Battery Adapter and connect the other end of the cable into a USB charger. The Battery Adapter supports worldwide 100-240V, 50/60 Hz power. The USB Type-C port supports both 5V/2A mobile chargers and the more powerful 12V/2A chargers, such as the one used by the Ronin-S. The Battery Adapter can also be combined with the Ronin-S grip to create a power bank. When you have it attached to the grip and the grip has been charged enough to provide power, you can connect a mobile device or other external device to the Battery Adapter's USB Type-A port and the power will come from the grip. SPECIFIKACIJE: Input USB Type-C port (supports 5 V/2 A and 12 V/2 A chargers) Output USB Type-A port (5 V/2 A) Operating Temperature 41 to 104°F / 5 to 40°C Weight Approx. 1.5 / 44 g UKLJUČUJE: DJI Ronin-S Battery Adapter
39,68 €
DJI Ronin-S külsől GPS modul
DJI Ronin-S vanjski GPS modul daje signal koji omogućuje gimbalu da bolje reagira na brze pokrete, pružajući bolju stabilnost duž horizonta. Paket uključuje Ronin-S adapter za montažu koji drži GPS modul. Adapter za montažu može se pričvrstiti na bočnu stranu gimbala ili na dodatni Ronin-S hot shoe.
47,31 €
DJI Ronin-S Spare Part 15 Top Hotshoe Bracket (CP.RN.00000023.01)
DJI Ronin-S Spare Part 15 Top Hotshoe Bracket (CP.RN.00000023.01) ZNAČAJKE: The DJI Ronin-S Top Hot Shoe Bracket allows you to mount your camera more securely on the Ronin-S gimbal. DJI recommends using it when you mount the gimbal on a car. One end attaches into the camera's shoe mount, but the bracket offers a cold shoe and M4 holes in exchange. SPECIFIKACIJE: Packaging Info Package Weight 0.355 lb Box Dimensions (LxWxH) 7.1 x 3.2 x 1.75" UKLJUČUJE: DJI Ronin-S Spare Part 15 Top Hotshoe Bracket
48,97 €
DJI Ronin-S Spare Part 21 External GPS Module (CP.RN.00000028.01)
DJI Ronin-S Spare Part 21 External GPS Module (CP.RN.00000028.01) ZNAČAJKE: The DJI Ronin-S External GPS Module provides a signal that allows the gimbal to react more responsively to quick movements, providing for better stability along the horizon. Included is the Ronin-S cheese plate that holds the GPS module. The cheese plate can be attached to the side of the gimbal or secured on top of the optional Ronin-S Hot Shoe Bracket. SPECIFIKACIJE: GNSS GPS + GLONASSS Operating Voltage 12 V Input Current 60 mA Weight 1.34 oz / 38 g Packaging Info Package Weight 0.29 lb Box Dimensions (LxWxH) 3.35 x 2.75 x 1.55" UKLJUČUJE: DJI Ronin-S Spare Part 21 External GPS Module
68,88 €
DJI Ronin-S Spare Part 14 Command Unit (CP.RN.00000021.01)
DJI Ronin-S Spare Part 14 Command Unit (CP.RN.00000021.01) ZNAČAJKE: The DJI Ronin-S Command Unit can be used instead of a mobile device to adjust settings and control certain functions of the gimbal during shooting. Adjust motor settings, switch operation modes, and select remote control settings by using the display screen and control button on the front of the unit. You can also access the Ronin-S Create feature through the unit. The Command Unit attaches to the pins on the side of Ronin-S but in turn provides the same pins so you can mount a focus wheel or other compatible accessory. SPECIFIKACIJE: Display Size 1.4" / 3.6 cm Resolution 320 x 320 Brightness 550 cd/m2 Packaging Info Package Weight 0.29 lb Box Dimensions (LxWxH) 3.75 x 2.7 x 2.3" UKLJUČUJE: DJI Ronin-S Spare Part 14 Command Unit
128,61 €
DJI Ronin-S Spare Part 20 Universal Mount (CP.RN.00000027.01)
DJI Ronin-S Spare Part 20 Universal Mount (CP.RN.00000027.01)
168,43 €
Osnovni komplet za proširenje DJI R (Ronin-S2 / Ronin-S3 Pro)
669,51 €
- Raspoloživo, isporuka odmah u trgovini
- Raspoloživo, isporuka do 2 dana po uplati
- U dolasku, po narudžbi
- Raspoloživost potrebno provjeriti
- Nije raspoloživo
Ocjene i komentari
Posjetitelje koji su gledali ovaj proizvod također su zanimali i proizvodi