Peak Design poklopac Capture Clip V3
Stavi u listu želja
Postavi obavijest o cijeni
Povijest najniže cijene
Podijeli
Prijavi grešku
Peak Design PRO Pad for Capture Camera Clip v3 (PP-2)
Peak Design PRO Pad for Capture Camera Clip v3 (PP-2) ZNAČAJKE: Stabilizer Accessory for Heavy Gear For Straps up to 3" Wide & 0.75" Thick Installs on Belt for Top-Loading Access Increases Comfort and Security EVA Laminated with Weatherproof Nylon Designed with the professional photographer in mind, the PROpad from Peak Design is an accessory pad for the Capture Camera Clip v3. Its semi-rigid EVA construction provides better stability when carrying heavy cameras, resulting in improved security and comfort. Laminated with weatherproof nylon around the exterior, the pad is charcoal in color and can be used during inclement weather conditions. The PROpad can be easily installed by threading a belt through its inner loop and attaching the clip onto the lower section of the fabric. This allows for top-loading access of your camera at waist level, ensuring your equipment is always within reach. Alternatively, you can run the Capture v3 itself through the loop to clamp the pad onto any strap up to 3" wide and as thick as 0.75". Stabilizer pad for Capture Clip v3, offers improved security and comfort when loading heavy camera lens combinations Can be installed onto belts or straps with maximum widths of 3" and as thick as 0.75" When worn on belt, it enables top-loading access to your camera for quick use while shooting Made of semi-rigid EVA that is laminated with nylon canvas, resistant to inclement weather SPECIFIKACIJE: Material EVA Nylon Compatibility Clip: Capture v3 Maximum Strap Width: 3" (7.6 cm) Maximum Strap Thickness: 0.75" (1.9 cm) Dimensions 5.2 x 2.8 x 0.4" (13.2 x 7 x 1.1 cm) UKLJUČUJE: Peak Design Pro Pad futrola za Capture Camera Clip v3
21,59 €
Peak Design Capture Clip V3 Silver kopča bez pločice (CC-S-3)
Peak Design Capture Clip V3 Silver CC-S-3 kopča bez pločice ZNAČAJKE: Clip Only, Replacement or Extra Part For Straps up to 2.5" Wide & 0.87" Thick Withstands Forces up to 200 lb Quick Release Button for Instant Access Slim Profile: 3.3" Length, Weighs 2.5 oz Security Lock Helps Prevent Accidents Anti-Slip Pad for Improved Stability Rust-Resistant Aluminum Construction Works with Most Other Peak Design Plates This silver Clip for Capture v3 from Peak Design serves as a replacement part or as an additional support point for the Capture v3 harness system. By equipping more than one bag or strap with Capture clips, you can carry several cameras at once or switch between the two clips easily for comfortable and versatile use. Note that a plate is not included with this product, and must be purchased separately in order to carry equipment. Keeping a slim profile at only 3.3" in length and weighing just 2.5 oz, the clip uses included thumbscrews or hex-head bolts to clamp onto any strap or belt as wide as 2.5" and as thick as 0.87". It is made of weatherproof aluminum to resist rust and is designed to withstand up to 200 lb of force. The clip is equipped with a quick release button so you can instantly grab your camera and start shooting, and it has a security lock that can be activated to prevent accidental release during longer trips. For enhanced stability, an anti-slip pad is used on the back plate for grip. All legacy Peak Design plates work with the Capture v3 clip except for the DUALplate v1, allowing you to carry objects such as lenses, binoculars, or GoPro cameras with optional accessories. Replacement or additional clip for Capture v3 system, plate must be purchased separately in order to carry equipment Made entirely of rust-resistant aluminum and designed to withstand up to 200 lb of force Fits straps or belts up to 2.5" wide, and as thick as 0.63" with thumbscrew bolts or up to 0.87" thick with hex-head bolts Anti-slip pad for better grip on the mounting surface, increasing stability Quick release button for swift and easy access to camera Security lock prevents accidental release for safety during longer excursions Slim design with a length of 3.3" and a weight of 2.5 oz Compatible with all Peak Design plates except for the DUALplate v1, allowing for objects such as GoPro, lenses, and binoculars to be used with optional accessories SPECIFIKACIJE: Compatibility Any strap or belt with these dimensions: Width: Up to 2.5" (6.4 cm) Thickness: Up to 0.63" (1.6 cm) with thumbscrews, or up to 0.87" (2.2 cm) with hex-head bolts Mounting Type Thumbscrews Hex-head clamping bolts Material Aluminum Dimensions 3.3 x 1.6 x 0.8" (8.3 x 4 x 2 cm) Weight 2.5 oz (70 g) UKLJUČUJE: Peak Design Capture Clip V3 Silver CC-S-3 kopča bez pločice
52,96 €
Peak Design Capture Clip V3 Silver
82,65 €
Peak Design Capture Clip V3 Black
82,65 €
- Raspoloživo, isporuka odmah u trgovini
- Raspoloživo, isporuka do 2 dana po uplati
- U dolasku, po narudžbi
- Raspoloživost potrebno provjeriti
- Nije raspoloživo
Ocjene i komentari
Posjetitelje koji su gledali ovaj proizvod također su zanimali i proizvodi