Peak Design Capture Camera Clip
Cijena
od
9,95 €
do
73,20 €
Stavi u listu želja
Postavi obavijest o cijeni
Povijest najniže cijene
Podijeli
Prijavi grešku
Peak Design Spare Bolt Pack Silver za Capture Camera Clip (CB-SV-1)
Peak Design Spare Bolt Pack Silver za Capture Camera Clip (CB-SV-1) ZNAČAJKE: Replacement or Spare Part Works with Capture v3 and v2 Models Pair of Thumbscrews for Easy Clamping Pair of Hex-Head Bolts for More Security Aluminum Head, Stainless-Steel Shaft Max Thickness for Thumbscrews: 0.63" Max Thickness for Hex-Head Bolts: 0.87" This silver Bolt Pack for Capture Camera Clip from Peak Design is a set of four replacement clamping bolts for the Capture v3 and v2 harnesses. Included in the package is a pair of thumbscrews, supporting straps as thick as 0.63", and a pair of hex-head fasteners for thicker straps up to 0.87". All parts are made with an anodized aluminum head and a stainless-steel shaft, with the thumb-driven bolts allowing you to easily add or remove the clip without the need of tools and the hex-driven bolts better suited for permanent installation. SPECIFIKACIJE: Compatibility Any strap or belt with these dimensions: Width: Up to 2.5" (6.4 cm) Thickness: Up to 0.63" (1.6 cm) with thumbscrews, or up to 0.87" (2.2 cm) with hex-head bolts Material Anodized aluminum head Stainless-steel shaft Dimensions Thumbscrews Length: 0.8" (2 cm) Head Diameter: 0.7" (1.8 cm) Shaft Diameter: 0.2" (0.5 cm), M5 (31.8) TPI Hex-Head Bolts Length: 0.88" (2.2 cm) Head Diameter: 0.45" (1.15 cm) Shaft Diameter: 0.2" (0.5 cm), M5 (31.8) TPI Weight 0.1 oz (4 g) each Packaging Info Package Weight 0.1 lb Box Dimensions (LxWxH) 3.5 x 2.5 x 0.1" UKLJUČUJE: Peak Design Bolt Pack for Capture Camera Clip (Silver)9,95 €
74,97 kn
Peak Design Spare Bolt Pack Black za Capture Camera Clip (CB-BK-1)
Peak Design Spare Bolt Pack Black za Capture Camera Clip (CB-BK-1) ZNAČAJKE: Replacement or Spare Part Works with Capture v3 and v2 Models Pair of Thumbscrews for Easy Clamping Pair of Hex-Head Bolts for More Security Aluminum Head, Stainless-Steel Shaft Max Thickness for Thumbscrews: 0.63" Max Thickness for Hex-Head Bolts: 0.87" This black Bolt Pack for Capture Camera Clip from Peak Design is a set of four replacement clamping bolts for the Capture v3 and v2 harnesses. Included in the package is a pair of thumbscrews, supporting straps as thick as 0.63", and a pair of hex-head fasteners for thicker straps up to 0.87". All parts are made with an anodized aluminum head and a stainless-steel shaft, with the thumb-driven bolts allowing you to easily add or remove the clip without the need of tools and the hex-driven bolts better suited for permanent installation. SPECIFIKACIJE: Compatibility Any strap or belt with these dimensions: Width: Up to 2.5" (6.4 cm) Thickness: Up to 0.63" (1.6 cm) with thumbscrews, or up to 0.87" (2.2 cm) with hex-head bolts Material Anodized aluminum head Stainless-steel shaft Dimensions Thumbscrews Length: 0.8" (2 cm) Head Diameter: 0.7" (1.8 cm) Shaft Diameter: 0.2" (0.5 cm), M5 (31.8) TPI Hex-Head Bolts Length: 0.88" (2.2 cm) Head Diameter: 0.45" (1.15 cm) Shaft Diameter: 0.2" (0.5 cm), M5 (31.8) TPI Weight 0.1 oz (4 g) each Packaging Info Package Weight 0.85 lb Box Dimensions (LxWxH) 10.0 x 5.0 x 4.0" UKLJUČUJE: Peak Design Bolt Pack for Capture Camera Clip (Black)9,95 €
74,97 kn
Peak Design Standard Plate (PL-S-2)
Peak Design Standard Plate (PL-S-2) ZNAČAJKE: Arca-Type Compatible Dovetail Plate 4-Way Mountable, Low Profile Plate Compatible with Capture Camera Clip The Peak Design PL-S-2 Standard Plate is Arca-type and Capture Camera Clip compatible, which means it can mount in any direction within a clamp or quick release assembly because of the square shape of the plate. The low profile of the plate provides a seamless feel when it is attached to the camera. SPECIFIKACIJE: Package Weight 0.1 lb Box Dimensions (LxWxH) 3.0 x 2.7 x 0.9" UKLJUČUJE: Peak Design PL-S-2 Standard Plate19,78 €
149,03 kn
Peak Design Dual Plate v2 for Capture Camera Clip (PL-D-2)
Peak Design Dual Plate v2 for Capture Camera Clip (PL-D-2) ZNAČAJKE: Manfrotto RC2 and Arca-Type Compatible Fits Cameras with 1/4"-20 Threaded Mount Works with All Capture Clips Four Loops for Peak Design Anchors Mounting Slot Allows Several Positions Anodized Aluminum Construction Grip Pad for Heavy Gear With a focus on compatibility, the Dual Plate v2 from Peak Design is designed to work with all versions of the Capture camera clip for easy access and support for your gear. It fits in most tripod heads with Manfrotto RC2 or Arca-type quick release systems, featuring a standard 1/4"-20 screw at the top for connecting with the camera. The included 4mm hex wrench can be used to tighten or remove the mount. The mounting slot at the bottom allows for several positioning options, which helps prevent interference with tilting screens or battery compartments. With an anodized aluminum construction and grip pad, the Dual Plate v2 is durable and offers four loops for use with optional Peak Design anchors. SPECIFIKACIJE: Quick Release System Manfrotto RC2 Arca-type Compatibility Peak Design Capture, all versions Peak Design Anchors Camera Mount Screw 1/4"-20 Material Anodized aluminum Dimensions 2.04 x 1.65 x 0.43" / 5.2 x 4.2 x 1.1 cm Weight 1 oz / 28 g UKLJUČUJE: Peak Design Dual Plate v2 for Capture Camera Clip28,41 €
214,06 kn
Peak Design Bino Kit for Capture / Pro Clip (PL-BIN-1)
Peak Design Bino Kit for Capture / Pro Clip (PL-BIN-1) ZNAČAJKE: 1/4"-20 Mounting Stud Powder-Coated Die-Cast Aluminum For Capture and CapturePro Camera Clips Compatible with Arca-type Mounts Turn your Capture camera clip into a binocular holster with the Peak Design Bino Kit. The adapter enables you to carry any pair of binoculars with a 1/4"-20 tripod adapter in your Capture clip, and is compatible with the all versions of the Capture clip plus Arca-type compatible mounts. It is made of die-cast aluminum with a powder-coated finish to resist corrosion with minimal weight. SPECIFIKACIJE: Dimensions 2.9 x 2.25 x 1.5" / 7.4 x 5.7 x 3.8 cm Weight 1.6 oz / 44 g Packaging Info Package Weight 0.23 lb Box Dimensions (LxWxH) 4.75 x 3.0 x 2.15" UKLJUČUJE: Peak Design Capture/Pro Clip Bino Kit29,86 €
224,98 kn
Peak Design Capture Camera Clip V3 Black no plate CC-BK-3 kopča bez pločice
Peak Design Capture Camera Clip V3 Black no plate CC-BK-3 kopča bez pločice ZNAČAJKE: Clip Only, Replacement or Extra Part For Straps up to 2.5" Wide & 0.87" Thick Withstands Forces up to 200 lb Quick Release Button for Instant Access Slim Profile: 3.3" Length, Weighs 2.5 oz Security Lock Helps Prevent Accidents Anti-Slip Pad for Improved Stability Rust-Resistant Aluminum Construction Works with Most Other Peak Design Plates This black Clip for Capture v3 from Peak Design serves as a replacement part or as an additional support point for the Capture v3 harness system. By equipping more than one bag or strap with Capture clips, you can carry several cameras at once or switch between the two clips easily for comfortable and versatile use. Note that a plate is not included with this product, and must be purchased separately in order to carry equipment. Keeping a slim profile at only 3.3" in length and weighing just 2.5 oz, the clip uses included thumbscrews or hex-head bolts to clamp onto any strap or belt as wide as 2.5" and as thick as 0.87". It is made of weatherproof aluminum to resist rust and is designed to withstand up to 200 lb of force. The clip is equipped with a quick release button so you can instantly grab your camera and start shooting, and it has a security lock that can be activated to prevent accidental release during longer trips. For enhanced stability, an anti-slip pad is used on the back plate for grip. All legacy Peak Design plates work with the Capture v3 clip except for the DUALplate v1, allowing you to carry objects such as lenses, binoculars, or GoPro cameras with optional accessories. Replacement or additional clip for Capture v3 system, plate must be purchased separately in order to carry equipment Made entirely of rust-resistant aluminum and designed to withstand up to 200 lb of force Fits straps or belts up to 2.5" wide, and as thick as 0.63" with thumbscrew bolts or up to 0.87" thick with hex-head bolts Anti-slip pad for better grip on the mounting surface, increasing stability Quick release button for swift and easy access to camera Security lock prevents accidental release for safety during longer excursions Slim design with a length of 3.3" and a weight of 2.5 oz Compatible with all Peak Design plates except for the DUALplate v1, allowing for objects such as GoPro, lenses, and binoculars to be used with optional accessories SPECIFIKACIJE: Compatibility Any strap or belt with these dimensions: Width: Up to 2.5" (6.4 cm) Thickness: Up to 0.63" (1.6 cm) with thumbscrews, or up to 0.87" (2.2 cm) with hex-head bolts Mounting Type Thumbscrews Hex-head clamping bolts Material Aluminum Dimensions 3.3 x 1.6 x 0.8" (8.3 x 4 x 2 cm) Weight 2.5 oz (70 g) UKLJUČUJE: Peak Design Capture Camera Clip V3 Black no plate CC-BK-3 kopča bez pločice73,20 €
551,53 kn
- Raspoloživo, isporuka odmah u trgovini
- Raspoloživo, isporuka do 2 dana po uplati
- U dolasku, po narudžbi
- Raspoloživost potrebno provjeriti
- Nije raspoloživo
Ocjene i komentari
Proizvod još nije ocijenjen, promijeni to!
Posjetitelje koji su gledali ovaj proizvod također su zanimali i proizvodi