Sirui tripod N-2004
Cijena
od
189,03 €
do
326,93 €
Stavi u listu želja
Postavi obavijest o cijeni
Povijest najniže cijene
Podijeli
Prijavi grešku
SIRUI N-2004X Alu 163,5cm tripod + monopod
SIRUI N-2004X Alu 163,5cm tripod + monopod SIRUI N-2004X mono/tripod Alu 163,5cm Sirui N-2004X 4-Section Aluminum Tripod Product Highlights One Leg Unscrews to Become Monopod Maximum Tripod Height of 65" Load Capacity of 33.1 lb Forged Aluminum Alloy Chassis Split Center Column Three Position Leg Angle with Auto Lock Reversible 1/4"-20 & 3/8" Mounting Screw Legs Fold Up 180 Degrees; Folds to 18.1" Weighs Just 4.0 lb The Sirui N-2004X 4-Section Aluminum Tripod is a great tripod for anyone who needs to pack light and reserve the option to, at a moment's notice, slim down their camera's support system to just a monopod. The N-2004X features a leg that unscrews and attaches to a second included mounting plate to form a monopod. And, differing from the N-2004 model, the N-2004X features a split center column for a fast and easy transition to low-angle shooting. Reaching a maximum height of 65", the tripod itself is quite versatile in its own right – the N-2004X weighs just 4.0 lb but supports up to 33.1 lb thanks to its thick leg sections (only 3mm difference in diameter of each leg section) and forged aluminum alloy construction. It's suitable for use with just about any head and any 35mm camera, DSLR, point & shoot, or camcorder. The N-2004X tripod's legs fold upward 180° to achieve a relatively compact folded length of 18.1" – even with select head models attached. The entire package will fit comfortably in most carry-on bags and many backpacks. A custom case with padded handle is included. The tripod's center column is reversible, and the N-2004X comes with a short center column so that you can set up extremely close to the ground for ultra-low-angle shooting. With the center column split and the long section removed, you can set the legs at their widest angle (80°) and shoot from only 6.7" off the ground. The tripod converts easily into a monopod. A new split center column allows for faster and easier transition to low-angle shooting. Forged aluminum alloy results in stronger components than the traditional casting process that's often used for tripod chassis. Forging leads to more compacted metal and enhances the integrity of metal grains so they remain consistent and continuous. This leads to a longer product life and better performance. An anodizing surface treatment, produced by an electrolytic oxidation process to increase the thickness of the natural oxide layer on the surface of metal parts, is applied to increase corrosion & wear resistance and surface hardness, and to enhance color durability. 3mm diameter difference between each successive leg section for greater overall stability. Silicone twist locks for leg stages and anti-leg rotation system for faster, one-handed set-up. Automatic leg-angle lock mechanism for speed and convenience – independently lock legs into place at three different angles: 23°, 52° & 80°. Short center column allows the tripod to reach extremely low positions – minimum height of 6.7". An additional mounting plate attaches to the unscrewed monopod leg to mount a camera. A wrist strap is included for security in case the operator's grip slips. Leg warmer/padding facilitate handling in extreme weather conditions and adds level of protection. Center column hook allows you to add a ballast for a sturdier setup in windy conditions Reversible 1/4"-20 & 3/8"-16 screw on mounting plate enables the attachment of virtually any camera, camcorder, or head. Well-designed padded travel bag with sturdy shoulder strap for carrying is included. Load Capacity 33.1 lb (15 kg) Maximum Height Tripod: 65" (165.0 cm) Monopod: 63" (160.0 cm) Maximum Height w/o Column Extended Tripod: 54.7" (139.0 cm) Monopod: 54.7" (139.0 cm) Minimum Height Tripod: 6.7" (17.0 cm) Monopod: 16.9" (43.0 cm) Folded Length Legs reversed: 18.1" (46.0 cm) Legs retracted: 20.9" (53.0 cm) Weight 4.0 lb (1.8 kg) Material Aluminum Alloy Head Attachment Fitting 1/4"-20 & 3/8"-16 Leg Stages/Sections 3/4 Leg Lock Type Twist lock Diameter (Top Leg Section) 1.1" (28mm) Independent Leg Spread Yes Spiked/Retractable Feet Yes Center Brace No Center Column Type Split Center Column Sections 2 Bubble Level No UKLJUČUJE: Sirui N-2004X 4-Section Aluminum Tripod Short Center Column Monopod Mounting Platform Extra Reversible Mounting Screw Monopod Wrist Strap Padded Travel Case with Shoulder Strap Allen Keys Limited 6-year Warranty189,03 €
1.424,25 kn
Sirui EN-2004 Aluminum Tripod 165cm
Sirui EN-2004 Aluminum Tripod 165cm The EN-2004 Aluminum Tripod from Sirui is a full-size four-section aluminum alloy tripod that can convert into a monopod for versatile applications. With the center column extended, the tripod's maximum height is 65" and as a monopod its maximum height is 64". The tripod weighs just 4.2 lb and can support up to 31 lb. The split center column allows for easy changeover to a short column for low angle shots. Also, the center column can be reversed to shoot from under the tripod. The four-section legs feature flip locks for easy adjustment and each leg can be independently placed at three position angles and automatically lock in place for secure shooting on uneven ground. Retractable spiked feet supply additional stability when shooting outdoors. The legs on the EN-2004 fold up 180o for compact storage and transport; its folded length is just 19". The tripod's rugged spider is made from forged aluminum alloy and the legs are made from economical aluminum alloy for stability, performance and longevity. General Load Capacity 31" / 14 kg Head Attachment Fitting 1/4"-3/8" Screw Maximum Height 65" / 165 cm Maximum Height w/o Column Extended 53" / 135 cm Minimum Height 6" / 15 cm Folded Length 19" / 48 cm Weight 4.2 lb / 1.9 kg Legs Material Aluminum Leg Stages/Sections 3/4 Leg Lock Type Flip-lock Independent Leg Spread Yes Spiked/Retractable Feet Yes/Yes Center Brace No Center Column Center Column Type Rapid/Split Center Column Sections 2 Packaging Info Package Weight 6.25 lb Box Dimensions (LxWxH) 21.7 x 5.6 x 5.3"194,04 €
1.461,99 kn
Sirui N-3004X master alu tripod stativ + monopod aluminijski 4-Section Aluminum Alloy Stativ s integriranim monopodom
Sirui N-3004X master alu tripod stativ + monopod aluminijski 4-Section Aluminum Alloy Stativ s integriranim monopodom ZNAČAJKE: Maximum Height: 69.7" Load Capacity: 39.6 lb 180° Invertible Legs Split Center Column Convert to Monopod Reversible Center Column Twist-Lock Legs Three Leg Positions Rubber Feet with Retractable Spikes Padded Carrying Case The N-3004X Aluminum Tripod from Sirui is a compact tripod that extends to 69.7", and folds up to only 20.1" thanks to its 180° invertible legs. It weighs 4.8 lb and can hold a maximum load of 39.6 lb. The N-3004X features a split center column that is easily converted into a short center column by unscrewing the hanging hook and removing the bottom of the column. This allows the tripod to reach its minimum height of only 6.1". The tripod also features a detachable leg that transforms into a monopod when you unscrew it from the chassis and attach the mounting plate. You can increase the height of the monopod by attaching the longer section of the split center column. The tripod comes with a padded carrying case, a reversible mounting screw, and two hex keys for tightening the legs. The legs fold up against the tripod rather than down like most conventional tripod legs, keeping the tripod head within the legs and thereby saving space. The center column is reversible for low angle shots. Twist locks allow quick adjustment of the tripod's height. The tripod legs can lock in three different positions for shooting on uneven terrain. Stainless steel spikes emerge from the rubber feet for extra stability in grass, gravel, and other loose terrain. A foam grip on each of the legs adds comfort in cold weather conditions and helps protect your gear by facilitating a sure grip. A center column hook allows you to add a ballast for a sturdier setup in windy conditions. SIRUI NX Universal Series - Tripods with built in monopod The SIRUI NX series tripods combine light weight with a compact design. They are easy to use in any situation and always give your camera a solid support. The tripod can be folded by the legs 180 ° degrees upward. So the stands are when folded just 44 to 51,5cm high. The 4 or 5 leg sections are locked using flip- type leg locks that ensure excellent stability. The non-slip rubber feet with retractable metal spikes give good stability regardless of the surface (N-1004X, N-1204X and N-1205X have no spikes on the rubber feet). A stabilisation hook on the center column is as much a SIRUI standard, as the protection against the cold with the fitted non slip leg warmers. The special feature of these tripods is that one leg can be taken off and used as a fully functioning monopod. The center column can be unscrewed into two pieces, each piece is a different size. The short piece can be used on the tripod for ground levell shots, while the longer piece can be used to extend the monopod. N-1004X, N-2004X, N-3004X = high quality aluminium in 4 sections N-1204X, N-2204X, N-3204X = 100 % carbon 8x layers in 4 sections N-1205X, N-2205X, N-3205X = 100 % carbon 8x layers in 5 sections Legs can rotate a full 180 ° and have 3 fixed locking stages Short centre column for ground level shots Integrated monopod (hand strap and mounting plate included) Reversible 1/4" & 3/8" screw for tripod heads and camera Stabilisation hook and foam rubber grips Tripod bag and strap are included The pocket belt can also be used as tripod strap201,61 €
1.519,03 kn
Sirui EN-2004 + E20 komplet aluminijski stativ stalak i kuglasta glava za fotoaparat Aluminum Tripod + ball head Ein/Dreibeinstativ Alu mit Kopf E-20 + monopod
Sirui EN-2004 + E20 komplet aluminijski stativ stalak i kuglasta glava za fotoaparat Aluminum Tripod + ball head Ein/Dreibeinstativ Alu mit Kopf E-20 + monopod Short profile EN-2004 = aluminum high quality in 4 sections Legs 180 ° upward folding Divisible center column for ground level photography Monopod integrated (strap included) Including E20 turret Product description to Sirui EN-2004 + E20 A / tripod Alu with head E-20 The SIRUI EN series is based on the specifications forth on the NX Series. However, the EN Series has flip-locks instead Rings Locks. Here, everyone can decide for himself whether he is now working as rather with screw caps (ring-Locks) or the EN series with snap fasteners (Flip-Lock). The tripods EN-Series combine light weight with compact design. They are easy in any situation to handle and provide your camera is always a safe stop. The tripods can be folded by the legs to 180 ° can be pivoted upwards. So the stands when folded are just 48cm high. The 4 sections are fixed with 3 sealed flip Locks (snap fasteners) and ensure excellent stability. The non-slip rubber feet with out rotating metallic spikes improve stability when standing. A stabilizing hook on the center column is as much a SIRUI standard, as the Cold protection handles made of soft and grippy material. The special feature of these stands is that one leg can be removed and used as a monopod. The center column can be unscrew. It consists of two different-sized parts. The short piece can be used on a tripod for ground-level shots. With the long piece of the center column can be prima prolong removable monopod. Reversible 1/4 "& 3/8" screw for tripod heads or camera Practical snap fasteners for firm grip Stabilizing hooks or insulated handles Tripod Case and strap are included DETAILS ABOUT TURRET: The E Ballheads from the house SIRUI developing very accurate, smooth and soft. The base may be rotated 360 °, ideal for panoramic shots. The friction can be controlled by opening the fixation button. The safety lock system prevents accidental slippage of the quick release plate. The fixture for the removable disk is compatible with the Arca-Swiss system and allows the use of various panels. The e-version offers full metal buttons for better usability. The rubberized release plate has a 1/4 "screw with bail, so to tighten, no tools are necessary. The head has a bubble level for accurate alignment. The exterior 360 ° scale facilitates accurate adjustment of the head, for example, in panoramic images. SPECIFIKACIJA equipment Maximum working height 172 cm Pack size 58 cm Load capacity 12 kg measures and weight Weight ca. 2.2 kg Others Material Type aluminum delivery Included This product is delivered with accessories which are indicated as belonging to the manufacturer of the delivery.!286,05 €
2.155,24 kn
Sirui EN-2004 + K-20X komplet aluminijski stativ stalak i kuglasta glava za fotoaparat Aluminum Tripod + ball head Ein/Dreibeinstativ Alu mit Kopf K-20X + monopod
Sirui EN-2004 + K-20X komplet aluminijski stativ stalak i kuglasta glava za fotoaparat Aluminum Tripod + ball head Ein/Dreibeinstativ Alu mit Kopf K-20X + monopod Product Highlights Load Capacity: 31 lb Max Height: 65" Min Height: 6" Folded Length: 19" Leg Sections: 4 Weight: 4.2 lb One Leg Converts to Monopod Split Center Column Retractable Spiked Feet The EN-2004 Aluminum Tripod from Sirui is a full-size four-section aluminum alloy tripod that can convert into a monopod for versatile applications. With the center column extended, the tripod's maximum height is 65" and as a monopod its maximum height is 64". The tripod weighs just 4.2 lb and can support up to 31 lb. The split center column allows for easy changeover to a short column for low angle shots. Also, the center column can be reversed to shoot from under the tripod. The four-section legs feature flip locks for easy adjustment and each leg can be independently placed at three position angles and automatically lock in place for secure shooting on uneven ground. Retractable spiked feet supply additional stability when shooting outdoors. The legs on the EN-2004 fold up 180o for compact storage and transport; its folded length is just 19". The tripod's rugged spider is made from forged aluminum alloy and the legs are made from economical aluminum alloy for stability, performance and longevity. General Load Capacity 31 lb (14 kg) Head Mount Thread Size Reversible 1/4"-20 and 3/8"-16 Maximum Height 65" (165 cm) Maximum Height w/o Column Extended 53" (135 cm) Minimum Height 6" (15 cm) Folded Length 19" (48 cm) Weight 4.2 lb / 1.9 kg Legs Material Aluminum Leg Sections 4 Leg Lock Type Flip-lock Independent Leg Spread Yes Spiked/Retractable Feet Yes/Yes Center Brace No Center Column Center Column Type Rapid, split Center Column Sections 2 Packaging Info Package Weight 6.25 lb Box Dimensions (LxWxH) 21.7 x 5.6 x 5.3" Includes Case, Shoulder & Wrist Straps Sirui K-20X Knobs for Pan, Tilt & Tension 55 lb Load Capacity Quick-Release Plate Arca-Style Clamp for Quick Release 90° Tilt, 360° Pan CNC-Machined Aluminum Alloy The Sirui K-20x Ball Head is an extremely sturdy head with control knobs for pan, tilt, and tension, plus an Arca-style clamp for the included quick-release plate. The pan, tilt, and quick-release knobs are all separate, while the tension knob is integrated into the ball-locking (tilt) knob. The head tilts 90° for portrait orientation. The interior ball locking of the K-20x head has a sphere tolerance of 0.01mm, and it's equipped with an orientation-memory locking dial. This helps yield a high load capacity of 55 lb. The quick-release clamp features a secondary release button that prevents any inadvertent disengagement of the camera/plate from the clamp, thereby adding to the head's overall security & stability. The Arca-style platform conforms to standard sizes, so you can use compatible plates from other manufacturers. The three control knobs allow a photographer to exercise extremely fine control over the orientation of the camera, whether it's a DSLR, 35mm, medium-format camera, or even a camcorder. Pan, for instance, can be adjusted while the tilt stays locked, enabling precise movement that's measurable – there are degree markers at the panning base for panoramic photography. The K-20x is CNC-machined from an aircraft-grade aluminum alloy and anodized with an oxidation treatment that ensures a durable, high-quality finish. Arca-style quick-release clamp with secondary safety lock Two bubble levels (horizontal and vertical) on the quick-release platform ensure that your framing hews to the horizon in either portrait or landscape orientation The friction-control knob, integrated into the ball-locking knob, allows the operator to adjust the resistance of the ball's movement Quick-release plate is aluminum alloy with a rubberized surface Stainless steel camera screw Load Capacity 55 lb (25 kg) Ball Sphere Diameter 1.50" (38mm) Quick Release Yes, with Arca-style plate Spirit Level Yes, 2 Tension Control Yes, integrated into tilt-control knob Separate Panning Lock Yes Pan 360° Tilt 90° Head to Tripod Mounting Thread 3/8"-16 Female Camera Mounting 1/4"-20 Male Height 3.86" (9.8 cm) Maximum Diameter Not specified by manufacturer Weight 0.88 lb (0.4 kg) Packaging Info Package Weight 1.19 lb Box Dimensions (LxWxH) 5.5 x 4.7 x 2.8" The EN-2004 Aluminum Tripod from Sirui is a full-size four-section aluminum alloy tripod that can convert into a monopod for versatile applications. With the center column extended, the tripod's maximum height is 65" and as a monopod its maximum height is 64". The tripod weighs just 4.2 lb and can support up to 31 lb. The split center column allows for easy changeover to a short column for low angle shots. Also, the center column can be reversed to shoot from under the tripod. The four-section legs feature flip locks for easy adjustment and each leg can be independently placed at three position angles and...326,93 €
2.463,25 kn
- Raspoloživo, isporuka odmah u trgovini
- Raspoloživo, isporuka do 2 dana po uplati
- U dolasku, po narudžbi
- Raspoloživost potrebno provjeriti
- Nije raspoloživo
Ocjene i komentari
Proizvod još nije ocijenjen, promijeni to!
Posjetitelje koji su gledali ovaj proizvod također su zanimali i proizvodi