Mill TA MB250 250 W
Stavi u listu želja
Postavi obavijest o cijeni
Povijest najniže cijene
Podijeli
Prijavi grešku
MILL Panelni Konvektorski Radijator 250W, Staklo MB250
Elegantan MILL panelni konvektorski radijator 250W s aluminijskim grijaćim elementom, tihi rad, digitalni termostat i IPX4 certifikat. Idealno za male prostorije.96,83 €
Konvektorski panel radijator MILL MB250 (staklo, 250 W)
"Heating with style" Mill panel heater 250w white steel The Mill IB250 is the smallest model in the Mill Glass series. This toddler will keep small spaces, such as a small bedroom or hallway, heated. Its power is 250W.- Aluminum heating element - hi99,75 €
MILL panel convection radiator 250W glass MB250
MB250134,70 €
Racunala.HR
MILL panel convection radiator 250W glass MB250
"Heating with style" Mill panel heater 250w white steel The Mill IB250 is the smallest model in the Mill Glass series. This toddler will keep small spaces, such as a small bedroom or hallway, heated. Its power is 250W. Aluminum heating element - high efficiency and low temperature on the front surface 100% quiet operation Precise thermostat - digitally registered Easy to use On / Off Temperature calibration function Elegant shape Technical specifications: Power: 250w Material heating element: Aluminum Frame material: Glass Color: Mill white Cable: White, 80cm Cable orientation output: Right side IP classification: IPX4 (approved for bathroom use) Product size: (35.0 x 7.8 x 30.0 cm) Recommended room size: 2 - 5 m2 Buying instructions: Room size You will need to measure the size of the room, ie. floor area in square meters and ceiling height before deciding which model you need. If the space is too large, you may need more heaters to distribute the heat evenly between each source. In mild climates, use approx. 60-70 watts per square meter for calculation purposes and 70-85 watts per square meter for colder climates. A well-insulated house? The age and insulation of your home will also affect your heating needs. Less watts per square meter are needed for newer homes and homes with an influx of heat, while older and less well-insulated homes will need relatively more watts per square meter. Avoid the thermal bridge Although modern windows are impermeable, they are usually not insulated as well as walls. The air in them will cool quickly and sink towards the ground. This is called a thermal bridge, and can be avoided by installing a suitable radiator under each window. Go for more watts than you need Once you figure out how many watts you need, avoid buying a heater that just fits your needs. Buy such a product that gives you a little extra capacity so you don’t have to work at full power. The surface temperature of the heater will therefore be suitably lower. Also don't miss: Frequently Asked Questions (FAQ) MILGA-MB250119,75 €
- Raspoloživo, isporuka odmah u trgovini
- Raspoloživo, isporuka do 2 dana po uplati
- U dolasku, po narudžbi
- Raspoloživost potrebno provjeriti
- Nije raspoloživo
Ocjene i komentari
Posjetitelje koji su gledali ovaj proizvod također su zanimali i proizvodi