Manfrotto tripod MT055XPRO3
Stavi u listu želja
Postavi obavijest o cijeni
Povijest najniže cijene
Podijeli
Prijavi grešku
Manfrotto MT055XPRO3 stativ aluminijski stalak za fotoaparat 055 Alu 3-section
Manfrotto MT055XPRO3 stativ aluminijski stalak za fotoaparat 055 Alu 3-section Aluminijski stativ sa 3 izvlake za foto i video. Novi inovativni dizajn i tehnička dostignuća dio su vrhunskih performansi ovog stativa. Ključno obilježje stativa MT055XPRO3 je njegov središnji stupac sa mehanizmom. Mehanizam omogućava postavljanje stupca iz normalnog-okomitog položaja u vodoravan, čime otvora široku paletu mogućnosti za kadriranje i snimanje. To 190XPRO3 čini iznimno svestranim stativom pogodanim za širok raspon fotografskih i video aplikacija. Mehanizam za promjenu položaja središnjeg stupca smješten je unutar centralnog djela stativa zbog kompaktnosti. Prebacivanje iz okomitog u vodoravni položaj ne zahtijeva rastavljanje, pa čak može biti učinjeno sa postavljenim aparatom. Noge MT055 stativa se također mogu brzo proširiti i prilagoditi, zahvaljujući novim brzim kopčama (Quick power levers – QPL) koje blokiraju i deblokiraju svaki dio (sekciju) nogu. Poseban dizajn QPL kopči omogućuje udobniji i jači držanje kopče jednom rukom. Iz skupljenog polažaja, noga može biti razvučena u jednom pokretu. Dizajn QPL poluga također nudi i snažnije zaključavanje svake sekcije, što znači da je stativ stabilniji i krući nego stativi s tradicionalnim poluga kopčama. Intuitivni i ergonomski selektori kuta nogu dopuštaju da svaku nogu samostalno i čvrsto postavite na bilo koji od predodređenih kuteva. Mjehurić razine (libela) za precizno kadriranje ugrađen je na vrhu središnjeg stupa. Mjehurić razine moguće je slobodno okretati oko središnjeg stupa, tako da se može postaviti gdje god to korisniku najviše odgovoara, a da mu pri tome na smeta ili zaklanja postavljena glava, aparat ili slično. Na centralnom djelu stativa nalazi se EASY LINK priključak (sa navojem 3/8“ ) koji omogućava postavljanje raznog pribora (kao što su LED svjetlo, bljeskalica, reflektor, ili bilo koji drugi komad opreme) na Mini Magic arm, savitljivu ruku ili držač, te pretvara ovaj stativ u praktičan mobilni studio. Stativ je napravljen u Italiji. SPECIFIKACIJE: Oznaka: MT055XPRO3 Spojni navoj za glavu: 3/8 Okrugla libela na stativu: 1 kom Diam.cent.cijevi: 28mm Kut nogu: 25°.46°.66°.88° Diam. noge: 30-26-22.5 mm Materijal: Aluminij Boja: Crna Broj izvlaka: 3 Visina (skupljeni): 61.0cm Največa visina: 170.0cm Visina (spuštena cent.cijev): 140.0 cm Najniža visina: 9.0 cm Maksimalna nosivost: 9,0 kg Težina: 2,5 kg Proizvedeno: Italija
238,90 €
Manfrotto stativ MT055XPRO3-3W
302,48 €
Manfrotto MK055XPRO3-BHQ2 181.5cm 9kg stativ sa XPRO kugla glavom (kit with ball head) i 200PL Quick-Release System pločicom
Manfrotto MK055XPRO3-BHQ2 181.5cm 9kg stativ sa XPRO kugla glavom (kit with ball head) i 200PL Quick-Release System pločicom ZNAČAJKE: The MK055XPRO3-BHQ2 Aluminum Tripod from Manfrotto pairs the MT055XPRO3 aluminum tripod legs with the MHXPRO-BHQ2 XPRO Ball Head with a 200PL quick release clamp and plate. The tripod is a three-section support that has a load capacity of 17.6 lb and extends from 9" to 71.5". Its legs are secured by Quick Power Locks, which are updated flip locks that increase the tripod's rigidity by 50%, and its load capacity by 4.4 lb over its predecessor. A redesigned center column has a one-finger operation and includes an Easy Link attachment for attaching accessories such as an LED light or a reflector. The center column can be positioned horizontally, allowing for low-angle and macro photography. The upper disc where a tripod head is mounted has been redesigned as well, and now has a bull's eye bubble level that rotates 360°, so you can locate it where you can see it. This allows you to level your camera on both the horizontal and vertical planes. The included ball head lets you fine tune your adjustments thanks to separate knobs for both the ball and the 360° panning, as well as a friction control knob for more exacting placement. The 200PL quick-release clamp and plate allow for quick camera attachment and removal, and two bubble levels let you adjust your camera so the horizon is level. A numbered scale around the base of the head makes repeating exact pans an easy task. MT055XPRO3 Aluminum Tripod The Manfrotto MT055XPRO3 Aluminum Tripod is a three-section support that replaces the 055XPROB tripod. It has a load capacity of 19.8 lb and extends from 3.5" to 66.9". Its legs are secured by the Quick Power Locks. These updated flip locks increase the tripod's rigidity by 50%, and its load capacity by 4.4 lb over its predecessor. A redesigned center column has a "one finger" operation, and includes an Easy Link attachment for attaching accessories such as an LED light or a reflector. The center column can be positioned horizontally, allowing for low-angle and macro photography. The upper disc where a tripod head is mounted has been redesigned as well, and now has a bull's eye bubble level that rotates 360° so you can locate it where you can see it. This allows you to level your camera on both the horizontal and vertical planes. MHXPRO-BHQ2 XPRO Ball Head with 200PL Quick-Release System Accurately adjust your camera position with the MHXPRO-BHQ2 XPRO Ball Head with 200PL Quick-Release System from Manfrotto. Able to hold up to 22 lb, the 1.1 lb ball head is strong enough for most applications and ideally suited for an equally sturdy tripod. The XPRO lets you fine-tune your adjustments, thanks to separate knobs for both the ball and the 360° panning as well as a friction control knob for more exacting placement. The 200PL quick-release clamp and plate allow for quick camera attachment and removal, and two bubble levels let you adjust your camera so the horizon is level. A numbered scale around the base of the head makes repeating exact pans an easy task. SPECIFIKACIJE: Load Capacity 19.8 lb / 9 kg Maximum Working Height 66.9" / 169.9 cm Max Height without Center Column 55.1" / 140 cm Minimum Working Height 3.5" / 8.9 cm Folded Length 24" / 61 cm Head Mount Type 3/8"-16 Screw Weight 5.5 lb / 2.5 kg Materials Aluminum Alloy Bubble Level Rotating Legs Leg Lock Type Flip Lock Independent Leg Spread Yes Leg Sections 3 Center Column Center Column Sections 1 Center Column Extension Type Rapid Lateral / 90-Degree Center Column Yes Packaging Info Box Dimensions (LxWxH) 25.5 x 5.5 x 5.3" MHXPRO-BHQ2 XPRO Ball Head with 200PL Quick-Release System Load Capacity 22 lb (10 kg) Quick Release Yes Bubble Level Yes, 2 bull's eye Friction Control Yes Separate Panning Lock Yes Pan Range 360° Tilt Range -90° / +40° Tripod Mount Thread Size 3/8"-16 with 1/4"-20 bushing adapter Height 4.5" (11.5 cm) Weight 1.1 lb (500 g) Packaging Info Box Dimensions (LxWxH) 5.3 x 4.9 x 3.5"
344,95 €
- Raspoloživo, isporuka odmah u trgovini
- Raspoloživo, isporuka do 2 dana po uplati
- U dolasku, po narudžbi
- Raspoloživost potrebno provjeriti
- Nije raspoloživo
Ocjene i komentari
Posjetitelje koji su gledali ovaj proizvod također su zanimali i proizvodi