Mikrotik RB5009UPR router, 1000Mbps
Stavi u listu želja
Postavi obavijest o cijeni
Povijest najniže cijene
Podijeli
Prijavi grešku
MIKROTIK RB5009UPR+S+OUT Smart router
MikroTik RB5009UPr+S+OUT 1x2.5GbE PoE LAN 7xGbE PoE LAN 1xSFP+ port IP66 outdoor Smart router.
256,46 €
Mikrotik RouterBOARD RB5009UPr+S+IN, ARMv8 CPU, 1GB DDR4 RAM, 1GB NAND, 1×2.5Gbit LAN, 7×1Gbit LAN, 802.3af/at PoE-out/-in, 1xSFP+, RouterOS L5, metalno desktop kučište, PSU
RB5009UPr+S+IN
267,90 €
MikroTik RouterBOARD RB5009UPr+S+IN
270,43 €
Mikrotik RouterBORD 5009UPr+S+IN with Marvell Armada ARMv8 CPU (4-cores, 1.4GHz per core), 1GB of DDR4 RAM, 1GB NAND storage, 1x 2.5Gbit LAN (802.3af/at PoE-out and POE-in), 7x 1Gbit LAN (802.3af/at P
RB5009UPR+S+IN
278,75 €
Mikrotik RB5009UPr+S+IN, Router heavy-duty, 1GB DDR4 RAM, 1GB NAND, 1×2.5 G-LAN, 7×G-LAN, 802.3af/at PoE-out/-in, 1xSFP+, RouterOS L5
• Connectors and Interfaces• Multiple WAN:Yes• LAN speed:(7) 10/100/1000Mbps + (1) 100M/1G/2.5G• Gigabit LAN:Yes• Optical interfaces:(1) 1/10Gbps• USB:Yes• Power• Power over Ethernet:802.3af, 802.3at, 24 .. 57V DC• Power type:PoE, DC connector, DC terminal• PoE Input ports:8• PoE type:PoE-Out + PoE-In• PoE-Out standards:802.3af, 802.3at, Passive 24V, Passive 48V• PoE Out ports:8• PoE budget [W]:130• Max. power consumption [W]:15• Power via connector/terminal:24 .. 57V DC• Physical characteristics• Design:Desktop• Fans:Without fan• Chassis design:Metal• Operating temperature [°C]:-40 up to 60• Width [mm]:220• Height [mm]:22• Depth [mm]:125• Hardware• CPU:88F7040• CPU frequency [MHz]:1400• CPU cores:4• Internal storage [MB]:1024• RAM [MB]:1024• Software• Operating system:RouterOS - L5• IPv6 support:Yes• Default IP address:192.168.88.1• Default login and password:admin / -
287,21 €
MikroTik RouterBOARD RB5009UPr S IN MIK-RB5009UPR+S+IN MIK-RB5009UPR+S+IN
MikroTik RouterBOARD RB5009UPr S IN. 1.4 GHz Quad Core Processor, 1GB RAM, 1GB NAND Storage, 7 x GbE Ports, 1 x 2.5 GbE Port, 1 x 10G SFP Port. USB 3.0 Port. RouterOS V7, Poe-in PoE-out 802.3af at on all 8 Ethernet Ports. Max PoE supply is 130W. Can also be powered by DC Jack or 2-pin connector. Više informacija možete pogledati ovdje
294,30 €
Mikrotik RouterBOARD RB5009UPr+S+IN, ARMv8 CPU, 1GB DDR4 RAM, 1GB NAND, 1×2.5Gbit LAN, 7×1Gbit LAN, 802.3af/at PoE-out/-in, 1xSFP+, RouterOS L5, metalno desktop kučište, PSU 57994 57994
IT’S ALL ABOUT THE POWER... - This version of the RB5009 has all the bells and whistles of the previous model: Gigabit Ethernet, 2.5 Gigabit Ethernet, and a 10 Gigabit SFP+ cage for fiber connectivity. It has the speed, the power, and the durability. But this time, we have added PoE-in & PoE-out on all eight Ethernet ports. Combined with the 2-pin connector and the DC jack, you’re getting 10 separate ways of powering. Dual redundant power supplies would usually take your uninterrupted uptime to the next level. RB5009UPr+S+IN takes it one step above that! - All power options support a wide voltage range of 24 – 57 V. However, you can not mix the voltages. If you’re using PoE-out to power other devices, the board will choose the source with the highest voltage (DC jack or the 2-pin connector) to power those. - Each PoE-out port can supply up to 25W of power. All the ports combined are limited to 130W, which should be enough for most setups. You can specify maximum available power from your power sources manually, if necessary. When it comes to PoE-out features, the new RB5009 can trade blows with our legendary PoE switches: CRS354 & CRS328. In the smallest possible form-factor and for the best price on the market! PROTECT YOUR UPTIME, PROTECT YOUR TRANQUILITY! - So what exactly happens if there is a problem with one of your power sources? Here’s a quick example: you have 24V on the DC jack, 48V on the 2-pin connector, and 57V on the PoE-in. The board itself gets powered by the highest voltage input – the PoE-in. If there’s a problem, RB5009 will fall back to the second highest voltage - the 2-pin connector. And if that fails – there’s the 24V option on the DC jack. - What about the PoE-out devices? Once again – the highest voltage wins. PoE-out devices will draw power from the 48V source on the 2-pin connector. If that fails – the 24V on the DC jack come into play. The board will always reserve 20 watts to power itself. If there is not enough power for all the PoE-out ports, it will start disabling the ones with the lowest priority. You can set the port priority manually. - This tiny form-factor shines anywhere: from confined research facilities and offices to huge corporate server rooms. And don’t forget that you can mount FOUR of these routers in a single 1U rackmount space With the new RB5009, we want to empower all the small and medium ISPs that are always on the lookout for the most cost-effective and robust solutions. It is a perfect addition to our previous GPEN devices – a line of products designed to replace the expensive GPON solutions. With so many powering options and a durable metallic case, the new RB5009 redefines affordable reliability. Specifications - Architecture: ARM 64bit - CPU: 88F7040 - CPU core count: 4 - CPU nominal frequency: 350-1400 (auto) MHz - Switch chip model: 88E6393 - RouterOS license: 5 - Operating System: RouterOS (v7 only) - Size of RAM: 1 GB - Storage size: 1 GB - Storage type: NAND - MTBF: Approximately 200000 hours at 25C - Tested ambient temperature: -40°C to 60°C - IPsec hardware acceleration : Yes Powering - Number of DC inputs: 3 (DC jack, PoE-IN, 2-pin terminal) - DC jack input Voltage: 24-57 V - 2-pin terminal input Voltage: 24-57 V - Max power consumption: 150 W - Max power consumption without attachments: 15 W - Cooling type: Passive - PoE in: 802.3af/at (ether1), Mode B (ether2-ether8) - PoE in input Voltage: 24-57 V PoE-out - PoE-out ports: Ether1-Ether8 - PoE out: 802.3af/at - Max out per port output (input 18-30 V): 640 mA - Max out per port output (input 30-57 V): 420 mA - Max total out (A): 2.59 A - Total output current: 2.28 - Total output power: 130 Ethernet - 10/100/1000 Ethernet ports: 7 - Number of 1G Ethernet ports with Reverse PoE (PoE-in): 7 - Number of 2.5G Ethernet ports: 1 - Number of 2.5G Ethernet ports with Reverse PoE (PoE-in): 1 Fiber - S-FP+ ports: 1 Peripherals - Number of USB ports: 1 - USB Power Reset: Yes - USB slot type: USB 3.0 type A - Max USB current (A): 1 Other - CPU temperature monitor: Yes - Current Monitor: Yes - PCB temperature monitor: Yes - Voltage Monitor: Yes Certification & Approvals - Certification: CE, EAC, ROHS - IP: 20
295,20 €
Mikrotik RouterBOARD RB5009UPr+S+IN, ARMv8 CPU, 1GB DDR4 RAM, 1GB NAND, 1×2.5Gbit LAN, 7×1Gbit LAN, 802.3af/at PoE-out/-in, 1xSFP+, RouterOS L5, metalno desktop kučište, PSU; Brand: MIKROTIK; Model: ; PartNo: 4752224007155; 57994 IT’S ALL ABOUT THE POWER... - This version of the RB5009 has all the bells and whistles of the previous model: Gigabit Ethernet, 2.5 Gigabit Ethernet, and a 10 Gigabit SFP+ cage for fiber connectivity. It has the speed, the power, and the durability. But this...
296,25 €
Mikrotik RouterBOARD RB5009UPr+S+IN, ARMv8 CPU, 1GB DDR4 RAM, 1GB NAND, 1×2.5Gbit LAN, 7×1Gbit LAN, 802.3af/at PoE-out/-in, 1xSFP+, RouterOS L5, metalno desktop kučište, PSU, 57994
57994 IT’S ALL ABOUT THE POWER... - This version of the RB5009 has all the bells and whistles of the previous model: Gigabit Ethernet, 2.5 Gigabit Ethernet, and a 10 Gigabit SFP+ cage for fiber connectivity. It has the speed, the power, and the durability. But this time, we have added PoE-in & PoE-out on all eight Ethernet ports. Combined with the 2-pin connector and the DC jack, you’re getting 10 separate ways of powering. Dual redundant power supplies would usually take your uninterrupted uptime to the next level. RB5009UPr+S+IN takes it one step above that! - All power options support a wide voltage range of 24 – 57 V. However, you can not mix the voltages. If you’re using PoE-out to power other devices, the board will choose the source with the highest voltage (DC jack or the 2-pin connector) to power those. - Each PoE-out port can supply up to 25W of power. All the ports combined are limited to 130W, which should be enough for most setups. You can specify maximum available power from your power sources manually, if necessary. When it comes to PoE-out features, the new RB5009 can trade blows with our legendary PoE switches: CRS354 & CRS328. In the smallest possible form-factor and for the best price on the market! PROTECT YOUR UPTIME, PROTECT YOUR TRANQUILITY! - So what exactly happens if there is a problem with one of your power sources? Here’s a quick example: you have 24V on the DC jack, 48V on the 2-pin connector, and 57V on the PoE-in. The board itself gets powered by the highest voltage input – the PoE-in. If there’s a problem, RB5009 will fall back to the second highest voltage - the 2-pin connector. And if that fails – there’s the 24V option on the DC jack. - What about the PoE-out devices? Once again – the highest voltage wins. PoE-out devices will draw power from the 48V source on the 2-pin connector. If that fails – the 24V on the DC jack come into play. The board will always reserve 20 watts to power itself. If there is not enough power for all the PoE-out ports, it will start disabling the ones with the lowest priority. You can set the port priority manually. - This tiny form-factor shines anywhere: from confined research facilities and offices to huge corporate server rooms. And don’t forget that you can mount FOUR of these routers in a single 1U rackmount space With the new RB5009, we want to empower all the small and medium ISPs that are always on the lookout for the most cost-effective and robust solutions. It is a perfect addition to our previous GPEN devices – a line of products designed to replace the expensive GPON solutions. With so many powering options and a durable metallic case, the new RB5009 redefines affordable reliability. Specifications - Architecture: ARM 64bit - CPU: 88F7040 - CPU core count: 4 - CPU nominal frequency: 350-1400 (auto) MHz - Switch chip model: 88E6393 - RouterOS license: 5 - Operating System: RouterOS (v7 only) - Size of RAM: 1 GB - Storage size: 1 GB - Storage type: NAND - MTBF: Approximately 200000 hours at 25C - Tested ambient temperature: -40°C to 60°C - IPsec hardware acceleration : Yes Powering - Number of DC inputs: 3 (DC jack, PoE-IN, 2-pin terminal) - DC jack input Voltage: 24-57 V - 2-pin terminal input Voltage: 24-57 V - Max power consumption: 150 W - Max power consumption without attachments: 15 W - Cooling type: Passive - PoE in: 802.3af/at (ether1), Mode B (ether2-ether8) - PoE in input Voltage: 24-57 V PoE-out - PoE-out ports: Ether1-Ether8 - PoE out: 802.3af/at - Max out per port output (input 18-30 V): 640 mA - Max out per port output (input 30-57 V): 420 mA - Max total out (A): 2.59 A - Total output current: 2.28 - Total output power: 130 Ethernet - 10/100/1000 Ethernet ports: 7 - Number of 1G Ethernet ports with Reverse PoE (PoE-in): 7 - Number of 2.5G Ethernet ports: 1 - Number of 2.5G Ethernet ports with Reverse PoE (PoE-in): 1 Fiber - S-FP+ ports: 1 Peripherals - Number of USB ports: 1 - USB Power Reset: Yes - USB slot type: USB 3.0 type A - Max USB current (A): 1 Other - CPU temperature monitor: Yes - Current Monitor: Yes - PCB temperature monitor: Yes - Voltage Monitor: Yes Certification & Approvals - Certification: CE, EAC, ROHS - IP: 20
296,84 €
MikroTik RouterBOARD RB5009UPr S OUT
RB5009UPR+S+OUT
297,00 €
MikroTik RouterBOARD RB5009UPr S IN; Brand: MikroTik; Model: ; PartNo: MIK-RB5009UPR+S+IN; MIK-RB5009UPRPLUSSPLUSIN MikroTik RouterBOARD RB5009UPr S IN. 1.4 GHz Quad Core Processor, 1GB RAM, 1GB NAND Storage, 7 x GbE Ports, 1 x 2.5 GbE Port, 1 x 10G SFP Port. USB 3.0 Port. RouterOS V7, Poe-in PoE-out 802.3af at on all 8 Ethernet Ports. Max PoE supply is 130W. Can also
304,25 €
MikroTik RouterBOARD RB5009UPr S IN
MikroTik RouterBOARD RB5009UPr S IN. 1.4 GHz Quad Core Processor, 1GB RAM, 1GB NAND Storage, 7 x GbE Ports, 1 x 2.5 GbE Port, 1 x 10G SFP Port. USB 3.0 Port. RouterOS V7, Poe-in PoE-out 802.3af at on all 8 Ethernet Ports. Max PoE supply is 130W. Can also be powered by DC Jack or 2-pin connector.Jamstvo: 24 mjeseci
304,29 €
MikroTik RouterBOARD RB5009UPr S OUT
MikroTik RouterBOARD RB5009UPr S OUT - Outdoor Router, 7x GbE Ports, 1x 2.5GbE Port, 10G SFP , Quad-Core CPU, 1GB DDR4 RAM, 1GB NAND, IP67Jamstvo: 24 mjeseci
306,29 €
MikroTik RB5009UPR+S+IN, upravljivi router, gigabit
MikroTik RB5009UPR+S+IN, upravljivi router, gigabit, 7 x ethernet port, 1 x 2.5GbE port, 1 x 10G SDP port, RouterOS V7, CPU 88F7040, RAM 1GB
307,38 €
57994 - Mikrotik RouterBOARD RB5009UPr+S+IN, ARMv8 CPU, 1GB DDR4 RAM, 1GB NAND, 1×2.5Gbit LAN, 7×1Gbit LAN, 802.3af/at PoE-out/-in, 1xSFP+, RouterOS L5, metalno desktop kučište, PSU - 57994 - IT’S ALL ABOUT THE POWER... - This version of the RB5009 has all the bells and whistles of the previous model: Gigabit Ethernet, 2.5 Gigabit Ethernet, and a 10 Gigabit SFP+ cage for fiber connectivity. It has the speed, the power, and the durability. But this time, we have added PoE-in & PoE-out...
IT’S ALL ABOUT THE POWER... - This version of the RB5009 has all the bells and whistles of the previous model: Gigabit Ethernet, 2.5 Gigabit Ethernet, and a 10 Gigabit SFP+ cage for fiber connectivity. It has the speed, the power, and the durability. But this time, we have added PoE-in & PoE-out on all eight Ethernet ports. Combined with the 2-pin connector and the DC jack, you’re getting 10 separate ways of powering. Dual redundant power supplies would usually take your uninterrupted uptime to the next level. RB5009UPr+S+IN takes it one step above that! - All power options support a wide voltage range of 24 – 57 V. However, you can not mix the voltages. If you’re using PoE-out to power other devices, the board will choose the source with the highest voltage (DC jack or the 2-pin connector) to power those. - Each PoE-out port can supply up to 25W of power. All the ports combined are limited to 130W, which should be enough for most setups. You can specify maximum available power from your power sources manually, if necessary. When it comes to PoE-out features, the new RB5009 can trade blows with our legendary PoE switches: CRS354 & CRS328. In the smallest possible form-factor and for the best price on the market! PROTECT YOUR UPTIME, PROTECT YOUR TRANQUILITY! - So what exactly happens if there is a problem with one of your power sources? Here’s a quick example: you have 24V on the DC jack, 48V on the 2-pin connector, and 57V on the PoE-in. The board itself gets powered by the highest voltage input – the PoE-in. If there’s a problem, RB5009 will fall back to the second highest voltage - the 2-pin connector. And if that fails – there’s the 24V option on the DC jack. - What about the PoE-out devices? Once again – the highest voltage wins. PoE-out devices will draw power from the 48V source on the 2-pin connector. If that fails – the 24V on the DC jack come into play. The board will always reserve 20 watts to power itself. If there is not enough power for all the PoE-out ports, it will start disabling the ones with the lowest priority. You can set the port priority manually. - This tiny form-factor shines anywhere: from confined research facilities and offices to huge corporate server rooms. And don’t forget that you can mount FOUR of these routers in a single 1U rackmount space With the new RB5009, we want to empower all the small and medium ISPs that are always on the lookout for the most cost-effective and robust solutions. It is a perfect addition to our previous GPEN devices – a line of products designed to replace the expensive GPON solutions. With so many powering options and a durable metallic case, the new RB5009 redefines affordable reliability. Specifications - Architecture: ARM 64bit - CPU: 88F7040 - CPU core count: 4 - CPU nominal frequency: 350-1400 (auto) MHz - Switch chip model: 88E6393 - RouterOS license: 5 - Operating System: RouterOS (v7 only) - Size of RAM: 1 GB - Storage size: 1 GB - Storage type: NAND - MTBF: Approximately 200000 hours at 25C - Tested ambient temperature: -40°C to 60°C - IPsec hardware acceleration : Yes Powering - Number of DC inputs: 3 (DC jack, PoE-IN, 2-pin terminal) - DC jack input Voltage: 24-57 V - 2-pin terminal input Voltage: 24-57 V - Max power consumption: 150 W - Max power consumption without attachments: 15 W - Cooling type: Passive - PoE in: 802.3af/at (ether1), Mode B (ether2-ether8) - PoE in input Voltage: 24-57 V PoE-out - PoE-out ports: Ether1-Ether8 - PoE out: 802.3af/at - Max out per port output (input 18-30 V): 640 mA - Max out per port output (input 30-57 V): 420 mA - Max total out (A): 2.59 A - Total output current: 2.28 - Total output power: 130 Ethernet - 10/100/1000 Ethernet ports: 7 - Number of 1G Ethernet ports with Reverse PoE (PoE-in): 7 - Number of 2.5G Ethernet ports: 1 - Number of 2.5G Ethernet ports with Reverse PoE (PoE-in): 1 Fiber - S-FP+ ports: 1 Peripherals - Number of USB ports: 1 - USB Power Reset: Yes - USB slot type: USB 3.0 type A - Max USB current (A): 1 Other - CPU temperature monitor: Yes - Current Monitor: Yes - PCB temperature monitor: Yes - Voltage Monitor: Yes Certification & Approvals - Certification: CE, EAC, ROHS - IP: 20
309,53 €
Mikrotik RouterBOARD RB5009UPr+S+IN, ARMv8 CPU, 1GB DDR4 RAM, 1GB NAND, 1×2.5Gbit LAN, 7×1Gbit LAN, 802.3af/at PoE-out/-in, 1xSFP+, RouterOS L5, metalno desktop kučište, PSU
IT’S ALL ABOUT THE POWER... - This version of the RB5009 has all the bells and whistles of the previous model: Gigabit Ethernet, 2.5 Gigabit Ethernet, and a 10 Gigabit SFP+ cage for fiber connectivity. It has the speed, the power, and the durability.
309,69 €
Mikrotik RouterBOARD RB5009UPr+S+IN, ARMv8 CPU, 1GB DDR4 RAM, 1GB NAND, 1×2.5Gbit LAN, 7×1Gbit LAN, 802.3af/at PoE-out/-in, 1xSFP+, RouterOS L5, metalno desktop kučište, PSU
311,00 €
MIK-RB5009UPR+S+IN - MikroTik RouterBOARD RB5009UPr S IN MIK-RB5009UPR+S+IN - MIK-RB5009UPR+S+IN - MikroTik RouterBOARD RB5009UPr S IN. 1.4 GHz Quad Core Processor, 1GB RAM, 1GB NAND Storage, 7 x GbE Ports, 1 x 2.5 GbE Port, 1 x 10G SFP Port. USB 3.0 Port. RouterOS V7, Poe-in PoE-out 802.3af at on all 8 Ethernet Ports. Max PoE supply is 130W. Can also be powered by DC Jack or 2-pin connector. Više informacija možete pogledati ovdje
MikroTik RouterBOARD RB5009UPr S IN. 1.4 GHz Quad Core Processor, 1GB RAM, 1GB NAND Storage, 7 x GbE Ports, 1 x 2.5 GbE Port, 1 x 10G SFP Port. USB 3.0 Port. RouterOS V7, Poe-in PoE-out 802.3af at on all 8 Ethernet Ports. Max PoE supply is 130W. Can also be powered by DC Jack or 2-pin connector. Više informacija možete pogledati ovdje
312,25 €
MikroTik RouterBOARD RB5009UPr S IN
4752224007155 MikroTik RouterBOARD RB5009UPr S IN. 1.4 GHz Quad Core Processor, 1GB RAM, 1GB NAND Storage, 7 x GbE Ports, 1 x 2.5 GbE Port, 1 x 10G SFP Port. USB 3.0 Port. RouterOS V7, Poe-in PoE-out 802.3af at on all 8 Ethernet Ports. Max PoE supply is 130W. Can also be powered by DC Jack or 2-pin connector. MIK-RB5009UPR+S+IN
313,39 €
RouterBOARD MIKROTIK RB5009UPr+S+IN (bez Wi-Fi, 10/100/1000 Mbit/s Ethernet LAN RJ-45 portovi)
313,41 €
MIK-RB5009UPR+S+OUT - MikroTik RouterBOARD RB5009UPr S OUT MIK-RB5009UPR+S+OUT - MIK-RB5009UPR+S+OUT - MikroTik RouterBOARD RB5009UPr S OUT - Outdoor Router, 7x GbE Ports, 1x 2.5GbE Port, 10G SFP , Quad-Core CPU, 1GB DDR4 RAM, 1GB NAND, IP67 Više informacija možete pogledati ovdje
MikroTik RouterBOARD RB5009UPr S OUT - Outdoor Router, 7x GbE Ports, 1x 2.5GbE Port, 10G SFP , Quad-Core CPU, 1GB DDR4 RAM, 1GB NAND, IP67 Više informacija možete pogledati ovdje
314,31 €
MikroTik RouterBOARD RB5009UPR+S+OUT
4752224008459 MikroTik RouterBOARD RB5009UPr S OUT - Outdoor Router, 7x GbE Ports, 1x 2.5GbE Port, 10G SFP , Quad-Core CPU, 1GB DDR4 RAM, 1GB NAND, IP67 MIK-RB5009UPR+S+OUT
315,45 €
Mikrotik RouterBOARD RB5009UPr+S+IN, ARMv8 CPU, 1GB DDR4 RAM, 1GB NAND, 1×2.5Gbit LAN, 7×1Gbit LAN, 802.3af/at PoE-out/-, ARMv8 CPU, 1GB DDR4 RAM, 1GB NAND, 1×2.5Gbit LAN, 7×1Gbit LAN, 802.3af/at PoE-out/- RB5009UPr+S+IN
IT’S ALL ABOUT THE POWER... - This version of the RB5009 has all the bells and whistles of the previous model: Gigabit Ethernet, 2.5 Gigabit Ethernet, and a 10 Gigabit SFP+ cage for fiber connectivity. It has the speed, the power, and the durability. But this time, we have added PoE-in & PoE-out on all eight Ethernet ports. Combined with the 2-pin connector and the DC jack, you’re getting 10 separate ways of powering. Dual redundant power supplies would usually take your uninterrupted uptime to the next level. RB5009UPr+S+IN takes it one step above that! - All power options support a wide voltage range of 24 – 57 V. However, you can not mix the voltages. If you’re using PoE-out to power other devices, the board will choose the source with the highest voltage (DC jack or the 2-pin connector) to power those. - Each PoE-out port can supply up to 25W of power. All the ports combined are limited to 130W, which should be enough for most setups. You can specify maximum available power from your power sources manually, if necessary. When it comes to PoE-out features, the new RB5009 can trade blows with our legendary PoE switches: CRS354 & CRS328. In the smallest possible form-factor and for the best price on the market! PROTECT YOUR UPTIME, PROTECT YOUR TRANQUILITY! - So what exactly happens if there is a problem with one of your power sources? Here’s a quick example: you have 24V on the DC jack, 48V on the 2-pin connector, and 57V on the PoE-in. The board itself gets powered by the highest voltage input – the PoE-in. If there’s a problem, RB5009 will fall back to the second highest voltage - the 2-pin connector. And if that fails – there’s the 24V option on the DC jack. - What about the PoE-out devices? Once again – the highest voltage wins. PoE-out devices will draw power from the 48V source on the 2-pin connector. If that fails – the 24V on the DC jack come into play. The board will always reserve 20 watts to power itself. If there is not enough power for all the PoE-out ports, it will start disabling the ones with the lowest priority. You can set the port priority manually. - This tiny form-factor shines anywhere: from confined research facilities and offices to huge corporate server rooms. And don’t forget that you can mount FOUR of these routers in a single 1U rackmount space With the new RB5009, we want to empower all the small and medium ISPs that are always on the lookout for the most cost-effective and robust solutions. It is a perfect addition to our previous GPEN devices – a line of products designed to replace the expensive GPON solutions. With so many powering options and a durable metallic case, the new RB5009 redefines affordable reliability. Specifications - Architecture: ARM 64bit - CPU: 88F7040 - CPU core count: 4 - CPU nominal frequency: 350-1400 (auto) MHz - Switch chip model: 88E6393 - RouterOS license: 5 - Operating System: RouterOS (v7 only) - Size of RAM: 1 GB - Storage size: 1 GB - Storage type: NAND - MTBF: Approximately 200'000 hours at 25C - Tested ambient temperature: -40°C to 60°C - IPsec hardware acceleration : Yes Powering - Number of DC inputs: 3 (DC jack, PoE-IN, 2-pin terminal) - DC jack input Voltage: 24-57 V - 2-pin terminal input Voltage: 24-57 V - Max power consumption: 150 W - Max power consumption without attachments: 15 W - Cooling type: Passive - PoE in: 802.3af/at (ether1), Mode B (ether2-ether8) - PoE in input Voltage: 24-57 V PoE-out - PoE-out ports: Ether1-Ether8 - PoE out: 802.3af/at - Max out per port output (input 18-30 V): 640 mA - Max out per port output (input 30-57 V): 420 mA - Max total out (A): 2.59 A - Total output current: 2.28 - Total output power: 130 Ethernet - 10/100/1000 Ethernet ports: 7 - Number of 1G Ethernet ports with Reverse PoE (PoE-in): 7 - Number of 2.5G Ethernet ports: 1 - Number of 2.5G Ethernet ports with Reverse PoE (PoE-in): 1 Fiber - S-FP+ ports: 1 Peripherals - Number of USB ports: 1 - USB Power Reset: Yes - USB slot type: USB 3.0 type A - Max USB current (A): 1 Other - CPU temperature monitor: Yes - Current Monitor: Yes - PCB temperature monitor: Yes - Voltage Monitor: Yes Certification & Approvals - Certification: CE, EAC, ROHS - IP: 20
318,55 €
MikroTik RouterBOARD RB5009UPr S IN MIK-RB5009UPR+S+IN
MikroTik RouterBOARD RB5009UPr S IN. 1.4 GHz Quad Core Processor, 1GB RAM, 1GB NAND Storage, 7 x GbE Ports, 1 x 2.5 GbE Port, 1 x 10G SFP Port. USB 3.0 Port. RouterOS V7, Poe-in PoE-out 802.3af at on all 8 Ethernet Ports. Max PoE supply is 130W. Can also be powered by DC Jack or 2-pin connector. Više informacija na linku
321,34 €
Mikrotik Router RB5009UPr+S+IN
Snažan Mikrotik router RB5009UPr+S+IN s PoE-in/out na svim portovima, 2.5/10 Gigabit Ethernet, SFP+ i mnogim opcijama napajanja. Idealno za ISP-ove.
321,76 €
Mikrotik RB5009UPr+S+IN
24-229879
322,70 €
MikroTik RouterBOARD RB5009UPr S OUT MIK-RB5009UPR+S+OUT
MikroTik RouterBOARD RB5009UPr S OUT - Outdoor Router, 7x GbE Ports, 1x 2.5GbE Port, 10G SFP , Quad-Core CPU, 1GB DDR4 RAM, 1GB NAND, IP67 Više informacija na linku
323,46 €
Mikrotik RB5009UPr+S+OUT PoE ruter, RouterOS v7, 1GB RAM, 350-1400 (auto) MHz 66103 66103
- An outdoor version of best-selling heavy-duty PoE router. Extensive power redundancy for the best price! 7x Gigabit Ethernet ports, 1x 2.5 Gigabit Ethernet, 10G SFP+, 1GB of RAM, 1GB NAND, modern quad-core CPU, 9 (!) powering options, durable IP66 waterproof enclosure. - As a network administrator, you never know when the next windstorm, lightning, flood, heatwave, or a power outage will strike. But with the right tools you can protect your network from most troubles! Here’s our wishlist for the perfect tool: - Like the indoor version, this RB5009 has 7x Gigabit Ethernet ports, one 2.5 Gigabit Ethernet port, a 10G SFP+ cage, and a full sized USB3 port! - When we say “extensive power redundancy”, we really mean it: the unit offers 9 possible ways of powering. There’s a 2-pin power connector on the front, as well as PoE-in and PoE-out on all eight Ethernet ports. The board can use any of these sources to power itself, choosing the one with the highest voltage when multiple sources are available. RB5009 takes up to 21W to power itself. If you’re using PoE-in, the board will stay on even if 8 of your 9 power sources suddenly go down. Unprecedented redundancy! - All power options support a wide voltage range of 24 – 57 V. However, you can not mix the voltages. - Each PoE-out port can supply up to 25W of power. All the ports combined are limited to 130W, which should be enough for most setups. (Note that the included PSU is capable of 96W total, so for maximum output, a different PSU will be needed). You can specify maximum available power from your power sources manually, if necessary. If you’re using PoE-out to power other devices, you have to provide power via the 2-pin connector to power those. - This product also features single voltage PoE-out – it can either be 802.3at/af compatible OR low-voltage PoE-out. That is determined by the voltage on the 2-pin connector, as no voltage conversion is done on this board. - When it comes to processing power and available use-cases, this router can do it all: PPPoE termination, DHCP to customers, Local Queuing, MPLS Push/Pop/Swap and MPLS Forwarding, VPLS/VXLAN Termination, Hardware bridging, and so much more! - The RB5009 series keep redefining affordable reliability for small, medium, and even large ISPs! - Adding an IP66-rated waterproof enclosure to the RB5009 series allowed us to meet all the requirements! The brand new RB5009UPr+S+OUT is a compact, cost-effective solution that will revolutionize your network tower setups. You’re getting one of the most powerful outdoor networking devices for the best price on the market! Features - Easy to deploy - Works well in ANY weather - Provides extensive power redundancy - Can be connected via most common networking interfaces - Has a CPU that is strong enough to take full advantage of the most powerful - Networking software in the world – RouterOS v7 - Doesn’t cost a fortune Specifications - Product code: RB5009UPr+S+OUT - Architecture: ARM 64bit - CPU: 88F7040 - CPU core count: 4 - CPU nominal frequency: 350-1400 (auto) MHz - Switch chip model: 88E6393 - RouterOS license: 5 - Operating System: RouterOS v7 - Size of RAM: 1 GB - Storage size: 1 GB - Storage type: NAND - MTBF: Approximately 200000 hours at 25C - Tested ambient temperature: -40°C to 70°C - IPsec hardware acceleration: Yes Powering - Number of DC inputs: 2 (2-pin terminal, PoE-IN) - 2-pin terminal input Voltage: 24-57 V - Max power consumption: 150 W - Max power consumption without attachments: 15 W - Cooling type: Passive - PoE in: 802.3af/at - PoE in input Voltage: 24-57 V PoE-out - PoE-out ports: Ether1-Ether8 - PoE out : 802.3af/at - Max out per port output (input 18-30 V): 900 mA - Max out per port output (input 30-57 V): 420 mA - Max total out (A): 2.59 A - Total output current: 2.28 - Total output power: 130 Ethernet - 10/100/1000 Ethernet ports: 7 - Number of 1G Ethernet ports with Reverse PoE (PoE-in): 7 - Number of 2.5G Ethernet ports: 1 - Number of 2.5G Ethernet ports with PoE-out: 1 Fiber - SFP+ ports: 1 Peripherals - Number of USB ports: 1 - USB Power Reset: Yes - USB slot type: USB 3.0 type A - Max USB current (A): 1.5 Other - CPU temperature monitor: Yes - Current Monitor: Yes - PCB temperature monitor: Yes - Voltage Monitor: Yes Certification & Approvals - Certification: CE, EAC, ROHS - IP: 66
327,60 €
MikroTik Router Heavy Duty PoE with 8x 2.5GbE + 1x 10G SFP, RB5009UPr+S+IN
Specifications Details Product code RB5009UPr+S+IN Architecture ARM 64bit CPU 88F7040 CPU core count 4 CPU nominal frequency 350-1400 (auto) MHz Switch chip model 88E6393 RouterOS license 5 Operating System RouterOS v7 Size of RAM 1 GB Storage size 1 GB Storage type NAND MTBF Approximately 200'000 hours at 25C Tested ambient temperature -40°C to 60°C IPsec hardware acceleration Yes Powering Details Number of DC inputs 3 (DC jack, PoE-IN, 2-pin terminal) DC jack input Voltage 24-57 V 2-pin terminal input Voltage 24-57 V Max power consumption 150 W Max power consumption without attachments 16 W Cooling type Passive PoE in 802.3af/at (ether1), Mode B (ether2-ether8) PoE in input Voltage 24-57 V PoE-out Details PoE-out ports Ether1-Ether8 PoE out 802.3af/at Max out per port output (input 18-30 V) 900 mA Max out per port output (input 30-57 V) 440 mA Max total out (A) 2.59 A Total output current 2.28 Total output power 130 Ethernet Details 10/100/1000 Ethernet ports 7 Number of 1G Ethernet ports with Reverse PoE (PoE-in) 7 Number of 2.5G Ethernet ports 1 Number of 2.5G Ethernet ports with Reverse PoE (PoE-in) 1 Fiber Details SFP+ ports 1 Peripherals Details Number of USB ports 1 USB Power Reset Yes USB slot type USB 3.0 type A Max USB current (A) 1.5 Other Details CPU temperature monitor Yes Current Monitor Yes PCB temperature monitor Yes Voltage Monitor Yes Certification & Approvals Details Certification CE, EAC, ROHS IP 20
329,00 €
Mikrotik RouterBOARD RB5009UPr+S+IN, ARMv8 CPU, 1GB DDR4 RAM, 1GB NAND, 1×2.5Gbit LAN, 7×1Gbit LAN, 802.3af/at PoE-out/-in, 1xSFP+, RouterOS L5, metal
IT’S ALL ABOUT THE POWER... - This version of the RB5009 has all the bells and whistles of the previous model: Gigabit Ethernet, 2.5 Gigabit Ethernet, and a 10 Gigabit SFP+ cage for fiber connectivity. It has the speed, the power, and the durability. But this time, we have added PoE-in & PoE-out on all eight Ethernet ports. Combined with the 2-pin connector and the DC jack, you’re getting 10 separate ways of powering. Dual redundant power supplies would usually take your uninterrupted uptime to the next level. RB5009UPr+S+IN takes it one step above that! - All power options support a wide voltage range of 24 – 57 V. However, you can not mix the voltages. If you’re using PoE-out to power other devices, the board will choose the source with the highest voltage (DC jack or the 2-pin connector) to power those. - Each PoE-out port can supply up to 25W of power. All the ports combined are limited to 130W, which should be enough for most setups. You can specify maximum available power from your power sources manually, if necessary. When it comes to PoE-out features, the new RB5009 can trade blows with our legendary PoE switches: CRS354 & CRS328. In the smallest possible form-factor and for the best price on the market! PROTECT YOUR UPTIME, PROTECT YOUR TRANQUILITY! - So what exactly happens if there is a problem with one of your power sources? Here’s a quick example: you have 24V on the DC jack, 48V on the 2-pin connector, and 57V on the PoE-in. The board itself gets powered by the highest voltage input – the PoE-in. If there’s a problem, RB5009 will fall back to the second highest voltage - the 2-pin connector. And if that fails – there’s the 24V option on the DC jack. - What about the PoE-out devices? Once again – the highest voltage wins. PoE-out devices will draw power from the 48V source on the 2-pin connector. If that fails – the 24V on the DC jack come into play. The board will always reserve 20 watts to power itself. If there is not enough power for all the PoE-out ports, it will start disabling the ones with the lowest priority. You can set the port priority manually. - This tiny form-factor shines anywhere: from confined research facilities and offices to huge corporate server rooms. And don’t forget that you can mount FOUR of these routers in a single 1U rackmount space With the new RB5009, we want to empower all the small and medium ISPs that are always on the lookout for the most cost-effective and robust solutions. It is a perfect addition to our previous GPEN devices – a line of products designed to replace the expensive GPON solutions. With so many powering options and a durable metallic case, the new RB5009 redefines affordable reliability. Specifications - Architecture: ARM 64bit - CPU: 88F7040 - CPU core count: 4 - CPU nominal frequency: 350-1400 (auto) MHz - Switch chip model: 88E6393 - RouterOS license: 5 - Operating System: RouterOS (v7 only) - Size of RAM: 1 GB - Storage size: 1 GB - Storage type: NAND - MTBF: Approximately 200'000 hours at 25C - Tested ambient temperature: -40°C to 60°C - IPsec hardware acceleration : Yes Powering - Number of DC inputs: 3 (DC jack, PoE-IN, 2-pin terminal) - DC jack input Voltage: 24-57 V - 2-pin terminal input Voltage: 24-57 V - Max power consumption: 150 W - Max power consumption without attachments: 15 W - Cooling type: Passive - PoE in: 802.3af/at (ether1), Mode B (ether2-ether8) - PoE in input Voltage: 24-57 V PoE-out - PoE-out ports: Ether1-Ether8 - PoE out: 802.3af/at - Max out per port output (input 18-30 V): 640 mA - Max out per port output (input 30-57 V): 420 mA - Max total out (A): 2.59 A - Total output current: 2.28 - Total output power: 130 Ethernet - 10/100/1000 Ethernet ports: 7 - Number of 1G Ethernet ports with Reverse PoE (PoE-in): 7 - Number of 2.5G Ethernet ports: 1 - Number of 2.5G Ethernet ports with Reverse PoE (PoE-in): 1 Fiber - S-FP+ ports: 1 Peripherals - Number of USB ports: 1 - USB Power Reset: Yes - USB slot type: USB 3.0 type A - Max USB current (A): 1 Other - CPU temperature monitor: Yes - Current Monitor: Yes - PCB temperature monitor: Yes - Voltage Monitor: Yes Certification & Approvals - Certification: CE, EAC, ROHS - IP: 20 5-57994
335,00 €
Mikrotik RouterBOARD RB5009UPr+S+IN, ARMv8 CPU, 1GB DDR4 RAM, 1GB NAND, 1×2.5Gbit LAN, 7×1Gbit LAN, 802.3af/at PoE-out/-in, 1xSFP+, RouterOS L5, metalno desktop kučište, PSU
IT’S ALL ABOUT THE POWER... - This version of the RB5009 has all the bells and whistles of the previous model: Gigabit Ethernet, 2.5 Gigabit Ethernet, and a 10 Gigabit SFP+ cage for fiber connectivity. It has the speed, the power, and the durability. But this time, we have added PoE-in & PoE-out on all eight Ethernet ports. Combined with the 2-pin connector and the DC jack, you’re getting 10 separate ways of powering. Dual redundant power supplies would usually take your uninterrupted uptime to the next level. RB5009UPr+S+IN takes it one step above that! - All power options support a wide voltage range of 24 – 57 V. However, you can not mix the voltages. If you’re using PoE-out to power other devices, the board will choose the source with the highest voltage (DC jack or the 2-pin connector) to power those. - Each PoE-out port can supply up to 25W of power. All the ports combined are limited to 130W, which should be enough for most setups. You can specify maximum available power from your power sources manually, if necessary. When it comes to PoE-out features, the new RB5009 can trade blows with our legendary PoE switches: CRS354 & CRS328. In the smallest possible form-factor and for the best price on the market! PROTECT YOUR UPTIME, PROTECT YOUR TRANQUILITY! - So what exactly happens if there is a problem with one of your power sources? Here’s a quick example: you have 24V on the DC jack, 48V on the 2-pin connector, and 57V on the PoE-in. The board itself gets powered by the highest voltage input – the PoE-in. If there’s a problem, RB5009 will fall back to the second highest voltage - the 2-pin connector. And if that fails – there’s the 24V option on the DC jack. - What about the PoE-out devices? Once again – the highest voltage wins. PoE-out devices will draw power from the 48V source on the 2-pin connector. If that fails – the 24V on the DC jack come into play. The board will always reserve 20 watts to power itself. If there is not enough power for all the PoE-out ports, it will start disabling the ones with the lowest priority. You can set the port priority manually. - This tiny form-factor shines anywhere: from confined research facilities and offices to huge corporate server rooms. And don’t forget that you can mount FOUR of these routers in a single 1U rackmount space With the new RB5009, we want to empower all the small and medium ISPs that are always on the lookout for the most cost-effective and robust solutions. It is a perfect addition to our previous GPEN devices – a line of products designed to replace the expensive GPON solutions. With so many powering options and a durable metallic case, the new RB5009 redefines affordable reliability. Specifications - Architecture: ARM 64bit - CPU: 88F7040 - CPU core count: 4 - CPU nominal frequency: 350-1400 (auto) MHz - Switch chip model: 88E6393 - RouterOS license: 5 - Operating System: RouterOS (v7 only) - Size of RAM: 1 GB - Storage size: 1 GB - Storage type: NAND - MTBF: Approximately 200000 hours at 25C - Tested ambient temperature: -40°C to 60°C - IPsec hardware acceleration: Yes Powering - Number of DC inputs: 3 (DC jack, PoE-IN, 2-pin terminal) - DC jack input Voltage: 24-57 V - 2-pin terminal input Voltage: 24-57 V - Max power consumption: 150 W - Max power consumption without attachments: 15 W - Cooling type: Passive - PoE in: 802.3af/at (ether1), Mode B (ether2-ether8) - PoE in input Voltage: 24-57 V PoE-out - PoE-out ports: Ether1-Ether8 - PoE out: 802.3af/at - Max out per port output (input 18-30 V): 640 mA - Max out per port output (input 30-57 V): 420 mA - Max total out (A): 2.59 A - Total output current: 2.28 - Total output power: 130 Ethernet - 10/100/1000 Ethernet ports: 7 - Number of 1G Ethernet ports with Reverse PoE (PoE-in): 7 - Number of 2.5G Ethernet ports: 1 - Number of 2.5G Ethernet ports with Reverse PoE (PoE-in): 1 Fiber - S-FP+ ports: 1 Peripherals - Number of USB ports: 1 - USB Power Reset: Yes - USB slot type: USB 3.0 type A - Max USB current (A): 1 Other - CPU temperature monitor: Yes - Current Monitor: Yes - PCB temperature monitor: Yes - Voltage Monitor: Yes Certification & Approvals - Certification: CE, EAC, ROHS - IP: 20
342,00 €
66103 - Mikrotik RB5009UPr+S+OUT PoE ruter, RouterOS v7, 1GB RAM, 350-1400 (auto) MHz - 66103 - - An outdoor version of best-selling heavy-duty PoE router. Extensive power redundancy for the best price! 7x Gigabit Ethernet ports, 1x 2.5 Gigabit Ethernet, 10G SFP+, 1GB of RAM, 1GB NAND, modern quad-core CPU, 9 (!) powering options, durable IP66 waterproof enclosure. - As a network administrator, you never know when the next windstorm, lightning, flood, heatwave, or a power outage will...
- An outdoor version of best-selling heavy-duty PoE router. Extensive power redundancy for the best price! 7x Gigabit Ethernet ports, 1x 2.5 Gigabit Ethernet, 10G SFP+, 1GB of RAM, 1GB NAND, modern quad-core CPU, 9 (!) powering options, durable IP66 waterproof enclosure. - As a network administrator, you never know when the next windstorm, lightning, flood, heatwave, or a power outage will strike. But with the right tools you can protect your network from most troubles! Here’s our wishlist for the perfect tool: - Like the indoor version, this RB5009 has 7x Gigabit Ethernet ports, one 2.5 Gigabit Ethernet port, a 10G SFP+ cage, and a full sized USB3 port! - When we say “extensive power redundancy”, we really mean it: the unit offers 9 possible ways of powering. There’s a 2-pin power connector on the front, as well as PoE-in and PoE-out on all eight Ethernet ports. The board can use any of these sources to power itself, choosing the one with the highest voltage when multiple sources are available. RB5009 takes up to 21W to power itself. If you’re using PoE-in, the board will stay on even if 8 of your 9 power sources suddenly go down. Unprecedented redundancy! - All power options support a wide voltage range of 24 – 57 V. However, you can not mix the voltages. - Each PoE-out port can supply up to 25W of power. All the ports combined are limited to 130W, which should be enough for most setups. (Note that the included PSU is capable of 96W total, so for maximum output, a different PSU will be needed). You can specify maximum available power from your power sources manually, if necessary. If you’re using PoE-out to power other devices, you have to provide power via the 2-pin connector to power those. - This product also features single voltage PoE-out – it can either be 802.3at/af compatible OR low-voltage PoE-out. That is determined by the voltage on the 2-pin connector, as no voltage conversion is done on this board. - When it comes to processing power and available use-cases, this router can do it all: PPPoE termination, DHCP to customers, Local Queuing, MPLS Push/Pop/Swap and MPLS Forwarding, VPLS/VXLAN Termination, Hardware bridging, and so much more! - The RB5009 series keep redefining affordable reliability for small, medium, and even large ISPs! - Adding an IP66-rated waterproof enclosure to the RB5009 series allowed us to meet all the requirements! The brand new RB5009UPr+S+OUT is a compact, cost-effective solution that will revolutionize your network tower setups. You’re getting one of the most powerful outdoor networking devices for the best price on the market! Features - Easy to deploy - Works well in ANY weather - Provides extensive power redundancy - Can be connected via most common networking interfaces - Has a CPU that is strong enough to take full advantage of the most powerful - Networking software in the world – RouterOS v7 - Doesn’t cost a fortune Specifications - Product code: RB5009UPr+S+OUT - Architecture: ARM 64bit - CPU: 88F7040 - CPU core count: 4 - CPU nominal frequency: 350-1400 (auto) MHz - Switch chip model: 88E6393 - RouterOS license: 5 - Operating System: RouterOS v7 - Size of RAM: 1 GB - Storage size: 1 GB - Storage type: NAND - MTBF: Approximately 200000 hours at 25C - Tested ambient temperature: -40°C to 70°C - IPsec hardware acceleration: Yes Powering - Number of DC inputs: 2 (2-pin terminal, PoE-IN) - 2-pin terminal input Voltage: 24-57 V - Max power consumption: 150 W - Max power consumption without attachments: 15 W - Cooling type: Passive - PoE in: 802.3af/at - PoE in input Voltage: 24-57 V PoE-out - PoE-out ports: Ether1-Ether8 - PoE out : 802.3af/at - Max out per port output (input 18-30 V): 900 mA - Max out per port output (input 30-57 V): 420 mA - Max total out (A): 2.59 A - Total output current: 2.28 - Total output power: 130 Ethernet - 10/100/1000 Ethernet ports: 7 - Number of 1G Ethernet ports with Reverse PoE (PoE-in): 7 - Number of 2.5G Ethernet ports: 1 - Number of 2.5G Ethernet ports with PoE-out: 1 Fiber - SFP+ ports: 1 Peripherals - Number of USB ports: 1 - USB Power Reset: Yes - USB slot type: USB 3.0 type A - Max USB current (A): 1.5 Other - CPU temperature monitor: Yes - Current Monitor: Yes - PCB temperature monitor: Yes - Voltage Monitor: Yes Certification & Approvals - Certification: CE, EAC, ROHS - IP: 66
343,91 €
Mikrotik RB5009UPr+S+OUT PoE ruter, RouterOS v7, 1GB RAM, 350-1400 (auto) MHz
- An outdoor version of best-selling heavy-duty PoE router. Extensive power redundancy for the best price! 7x Gigabit Ethernet ports, 1x 2.5 Gigabit Ethernet, 10G SFP+, 1GB of RAM, 1GB NAND, modern quad-core CPU, 9 (!) powering options, durable IP66
344,10 €
Mikrotik RB5009UPr+S+OUT PoE ruter, RouterOS v7, 1GB RAM, 350-1400 (auto) MHz
345,00 €
Mikrotik RouterBOARD RB5009UPr+S+IN, ARMv8 CPU, 1GB DDR4 RAM, 1GB NAND, 1×2.5Gbit LAN, 7×1Gbit LAN, 802.3af/at PoE-out/-in, 1xSFP+, RouterOS L5, metalno desktop kučište, PSU
346,00 €
Mikrotik RB5009UPr+S+OUT PoE ruter, RouterOS v7, 1GB RAM, 350-1400 (auto) MHz RB5009UPr+S+OUT
- An outdoor version of best-selling heavy-duty PoE router. Extensive power redundancy for the best price! 7x Gigabit Ethernet ports, 1x 2.5 Gigabit Ethernet, 10G SFP+, 1GB of RAM, 1GB NAND, modern quad-core CPU, 9 (!) powering options, durable IP66 waterproof enclosure. - As a network administrator, you never know when the next windstorm, lightning, flood, heatwave, or a power outage will strike. But with the right tools you can protect your network from most troubles! Here’s our wishlist for the perfect tool: - Like the indoor version, this RB5009 has 7x Gigabit Ethernet ports, one 2.5 Gigabit Ethernet port, a 10G SFP+ cage, and a full sized USB3 port! - When we say “extensive power redundancy”, we really mean it: the unit offers 9 possible ways of powering. There’s a 2-pin power connector on the front, as well as PoE-in and PoE-out on all eight Ethernet ports. The board can use any of these sources to power itself, choosing the one with the highest voltage when multiple sources are available. RB5009 takes up to 21W to power itself. If you’re using PoE-in, the board will stay on even if 8 of your 9 power sources suddenly go down. Unprecedented redundancy! - All power options support a wide voltage range of 24 – 57 V. However, you can not mix the voltages. - Each PoE-out port can supply up to 25W of power. All the ports combined are limited to 130W, which should be enough for most setups. (Note that the included PSU is capable of 96W total, so for maximum output, a different PSU will be needed). You can specify maximum available power from your power sources manually, if necessary. If you’re using PoE-out to power other devices, you have to provide power via the 2-pin connector to power those. - This product also features single voltage PoE-out – it can either be 802.3at/af compatible OR low-voltage PoE-out. That is determined by the voltage on the 2-pin connector, as no voltage conversion is done on this board. - When it comes to processing power and available use-cases, this router can do it all: PPPoE termination, DHCP to customers, Local Queuing, MPLS Push/Pop/Swap and MPLS Forwarding, VPLS/VXLAN Termination, Hardware bridging, and so much more! - The RB5009 series keep redefining affordable reliability for small, medium, and even large ISPs! - Adding an IP66-rated waterproof enclosure to the RB5009 series allowed us to meet all the requirements! The brand new RB5009UPr+S+OUT is a compact, cost-effective solution that will revolutionize your network tower setups. You’re getting one of the most powerful outdoor networking devices for the best price on the market! Features - Easy to deploy - Works well in ANY weather - Provides extensive power redundancy - Can be connected via most common networking interfaces - Has a CPU that is strong enough to take full advantage of the most powerful - Networking software in the world – RouterOS v7 - Doesn’t cost a fortune Specifications - Product code: RB5009UPr+S+OUT - Architecture: ARM 64bit - CPU: 88F7040 - CPU core count: 4 - CPU nominal frequency: 350-1400 (auto) MHz - Switch chip model: 88E6393 - RouterOS license: 5 - Operating System: RouterOS v7 - Size of RAM: 1 GB - Storage size: 1 GB - Storage type: NAND - MTBF: Approximately 200'000 hours at 25C - Tested ambient temperature: -40°C to 70°C - IPsec hardware acceleration: Yes Powering - Number of DC inputs: 2 (2-pin terminal, PoE-IN) - 2-pin terminal input Voltage: 24-57 V - Max power consumption: 150 W - Max power consumption without attachments: 15 W - Cooling type: Passive - PoE in: 802.3af/at - PoE in input Voltage: 24-57 V PoE-out - PoE-out ports: Ether1-Ether8 - PoE out : 802.3af/at - Max out per port output (input 18-30 V): 900 mA - Max out per port output (input 30-57 V): 420 mA - Max total out (A): 2.59 A - Total output current: 2.28 - Total output power: 130 Ethernet - 10/100/1000 Ethernet ports: 7 - Number of 1G Ethernet ports with Reverse PoE (PoE-in): 7 - Number of 2.5G Ethernet ports: 1 - Number of 2.5G Ethernet ports with PoE-out: 1 Fiber - SFP+ ports: 1 Peripherals - Number of USB ports: 1 - USB Power Reset: Yes - USB slot type: USB 3.0 type A - Max USB current (A): 1.5 Other - CPU temperature monitor: Yes - Current Monitor: Yes - PCB temperature monitor: Yes - Voltage Monitor: Yes Certification & Approvals - Certification: CE, EAC, ROHS - IP: 66
353,93 €
Mikrotik RB5009UPr+S+OUT PoE ruter, RouterOS v7, 1GB RAM, 350-1400 (auto) MHz
- An outdoor version of best-selling heavy-duty PoE router. Extensive power redundancy for the best price! 7x Gigabit Ethernet ports, 1x 2.5 Gigabit Ethernet, 10G SFP+, 1GB of RAM, 1GB NAND, modern quad-core CPU, 9 (!) powering options, durable IP66 waterproof enclosure. - As a network administrator, you never know when the next windstorm, lightning, flood, heatwave, or a power outage will strike. But with the right tools you can protect your network from most troubles! Here’s our wishlist for the perfect tool: - Like the indoor version, this RB5009 has 7x Gigabit Ethernet ports, one 2.5 Gigabit Ethernet port, a 10G SFP+ cage, and a full sized USB3 port! - When we say “extensive power redundancy”, we really mean it: the unit offers 9 possible ways of powering. There’s a 2-pin power connector on the front, as well as PoE-in and PoE-out on all eight Ethernet ports. The board can use any of these sources to power itself, choosing the one with the highest voltage when multiple sources are available. RB5009 takes up to 21W to power itself. If you’re using PoE-in, the board will stay on even if 8 of your 9 power sources suddenly go down. Unprecedented redundancy! - All power options support a wide voltage range of 24 – 57 V. However, you can not mix the voltages. - Each PoE-out port can supply up to 25W of power. All the ports combined are limited to 130W, which should be enough for most setups. (Note that the included PSU is capable of 96W total, so for maximum output, a different PSU will be needed). You can specify maximum available power from your power sources manually, if necessary. If you’re using PoE-out to power other devices, you have to provide power via the 2-pin connector to power those. - This product also features single voltage PoE-out – it can either be 802.3at/af compatible OR low-voltage PoE-out. That is determined by the voltage on the 2-pin connector, as no voltage conversion is done on this board. - When it comes to processing power and available use-cases, this router can do it all: PPPoE termination, DHCP to customers, Local Queuing, MPLS Push/Pop/Swap and MPLS Forwarding, VPLS/VXLAN Termination, Hardware bridging, and so much more! - The RB5009 series keep redefining affordable reliability for small, medium, and even large ISPs! - Adding an IP66-rated waterproof enclosure to the RB5009 series allowed us to meet all the requirements! The brand new RB5009UPr+S+OUT is a compact, cost-effective solution that will revolutionize your network tower setups. You’re getting one of the most powerful outdoor networking devices for the best price on the market! Features - Easy to deploy - Works well in ANY weather - Provides extensive power redundancy - Can be connected via most common networking interfaces - Has a CPU that is strong enough to take full advantage of the most powerful - Networking software in the world – RouterOS v7 - Doesn’t cost a fortune Specifications - Product code: RB5009UPr+S+OUT - Architecture: ARM 64bit - CPU: 88F7040 - CPU core count: 4 - CPU nominal frequency: 350-1400 (auto) MHz - Switch chip model: 88E6393 - RouterOS license: 5 - Operating System: RouterOS v7 - Size of RAM: 1 GB - Storage size: 1 GB - Storage type: NAND - MTBF: Approximately 200000 hours at 25C - Tested ambient temperature: -40°C to 70°C - IPsec hardware acceleration: Yes Powering - Number of DC inputs: 2 (2-pin terminal, PoE-IN) - 2-pin terminal input Voltage: 24-57 V - Max power consumption: 150 W - Max power consumption without attachments: 15 W - Cooling type: Passive - PoE in: 802.3af/at - PoE in input Voltage: 24-57 V PoE-out - PoE-out ports: Ether1-Ether8 - PoE out: 802.3af/at - Max out per port output (input 18-30 V): 900 mA - Max out per port output (input 30-57 V): 420 mA - Max total out (A): 2.59 A - Total output current: 2.28 - Total output power: 130 Ethernet - 10/100/1000 Ethernet ports: 7 - Number of 1G Ethernet ports with Reverse PoE (PoE-in): 7 - Number of 2.5G Ethernet ports: 1 - Number of 2.5G Ethernet ports with PoE-out: 1 Fiber - SFP+ ports: 1 Peripherals - Number of USB ports: 1 - USB Power Reset: Yes - USB slot type: USB 3.0 type A - Max USB current (A): 1.5 Other - CPU temperature monitor: Yes - Current Monitor: Yes - PCB temperature monitor: Yes - Voltage Monitor: Yes Certification & Approvals - Certification: CE, EAC, ROHS - IP: 66
380,00 €
Mikrotik RB5009UPr+S+OUT PoE ruter, RouterOS v7, 1GB RAM, 350-1400 (auto) MHz
384,00 €
Proxima Informatika
MikroTik RouterBOARD RB5009UPr S IN
309,80 €
Proxima Informatika
MikroTik RouterBOARD RB5009UPr S OUT
320,91 €
- Raspoloživo, isporuka odmah u trgovini
- Raspoloživo, isporuka do 2 dana po uplati
- U dolasku, po narudžbi
- Raspoloživost potrebno provjeriti
- Nije raspoloživo
Ocjene i komentari
Posjetitelje koji su gledali ovaj proizvod također su zanimali i proizvodi